VxRail Software

이 문서에서는 Dell Technologies Enterprise 및 Datacenter Infrastructure 제품에 대한 최소, 권장 및 최신 코드 버전을 강조합니다. Dell Technologies는 코드 배포 데이터를 신중하게 평가하고 모니터링하여 제품 릴리스가 고객에게 신뢰할 수 있는 제품과 솔루션을 제공하기 위한 엄격한 기대치를 충족하는지 확인합니다.

이 문서에서는 VxRail에서 생성한 계정 및 암호에 대한 규칙을 설명합니다. vCenter ESXi 호스트, VxRail Manager 및 PSC(Platform Services Controller) 루트 계정을 포함한 VxRail 계정 이름 지정에 대한 권장 사항, Dell VxRail에서 사용하는 계정 암호에 대한 일반적인 제안 모범 사례입니다.

VxRail Cluster를 업그레이드하기 전에 외부 vCenter를 업그레이드하는 방법에 대한 KB입니다.

During a VxRail LCM upgrade, the VxRail Manager UI may remain stuck in the “Upgrading” state for more than an hour with no visible progress and no new task updates. This occurs when resource issues prevent the VxRail Manager (vmware-marvin) service from fully initializing the LCM workflow, even though the upgrade completes in the background. Restarting the vmware-marvin service on the VxRail Manager VM allows the workflow to resume and the UI to reflect continued progress.

VCF has disconnected account from ESXi node account for root and built-in service account.

This enhancement makes it easier for both connected and non‑connected customers to access and copy important part information—such as part numbers and slot details—directly from event details in the Physical View UI. For connected customers, this information is automatically sent to Dell Support to help expedite issue resolution. Non‑connected customers can copy these details into the Dell Virtual Assistant to streamline issue resolution and support requests.

During Day 1 VxRail installation, enabling vSphere Lifecycle Manager fails because the VxRail Manager cannot prepare certificates. The failure is caused by a blocked SSH connection on TCP port 22 between VxRail Manager and the customer vCenter.

VxRail을 7.0.2에서 8.0+로 업그레이드할 때 "vSphere ESXi Dump Collector 포트"를 사전 검사하여 vCenter 업그레이드의 2단계에서 업그레이드가 실패할 수 있습니다.

During an upgrade from versions earlier than 8.0.210 to 8.0.300+, the process hangs at the post‑upgrade health‑check stage because required network ports are blocked, leading to timeouts and failure.

The VxRail plug‑in creates iDRAC users with simple passwords that violate the iDRAC password policy, causing the privilege to appear as "idrac.users.role.UNKNOWN" and preventing login. The issue stems from a mismatch between iDRAC UI validation and API behavior in VxRail 8.0.320.

This article explains how to reset the vCenter Server Appliance (VCSA) root password without rebooting for versions 7.x and 8.x, covering SSH access, shell enablement, account unlock, password change, and verification.

Event code: VXR508CTL13 This event code indicates "The <Controller name> cache has been discarded."

Event code: VXR508CTL215 This event code indicates "Redundant path disconnected on <Controller Name>."

잘못된 관리 계정 비밀번호로 인해 업그레이드 중에 자격 증명 및 설정을 입력하는 동안 다음 작업을 진행할 수 없습니다.

Event code: VXR508ENC4 This event code indicates "<Enclosure Name> firmware mismatch."

Event code: VXR508CPU9001 This event code indicates "CPU interconnect <CPU number> has a correctable error."

Event code: VXR508ENC31 This event code indicates "Firmware download on <Enclosure Name> has failed."

Event code: VXR508FAN0023 This event code indicates "Unable to read the <sensor name> sensor value."

Event code: VXR508CTL14 This event code indicates "Single-bit ECC error limit exceeded on the <controller name> DIMM."

Event code: VXR508ENC22 This event code indicates "The <Enclosure Name> has a bad sensor <args>."

Event code: VXR508FAN0012 This event code indicates "<fan name> RPM is less than the lower warning threshold."

Event code: VXR508IOV1009 This event code indicates "Mismatch in Slot or Virtual Adapter FQDD and Server Slot FQDD count."

Event code: VXR508NIC013 This event code indicates "Invalid AttributeName: <attribute name>"

vSphere Lifecycle Management (vLCM) cluster validation fails with “invalid vCenter root credential” if the vCenter password contains “ ” or “$”. The error is caused by a issue mishandling characters.

VxRail 8.0.x no longer provides VMware Realize Log Insight license or software.

Event code: VXR508FC004 This event code indicates "Invalid parameter value for <parameter value>"

Event code: VXR508NIC010 This event code indicates "Lifecycle Controller is not enabled, cannot create Configuration job."

Event code: VXR508NIC005 This event code indicates "Mismatch in AttributeName and AttributeValue count"

Event code: VXR508IOV1007 This event code indicates "Unable to assign a PCIe slot."

Event code: VXR508IOV115 This event code indicates "Unable to allocate <number of watts> WATTS for discovery of PCIE adapters."