VxRail E660F

Dit document belicht de minimale, aanbevolen en nieuwste codeversies voor Dell Technologies Enterprise- en Data Center Infrastructure-producten. Dell evalueert en bewaakt de implementatiedata van de code zorgvuldig om ervoor te zorgen dat productreleases voldoen aan onze strenge verwachtingen om onze klanten betrouwbare producten en oplossingen te bieden.

In dit artikel vindt u informatie over de VxRail VxVerify tool en hoe u VxVerify uitvoert in een VxRail omgeving.

Event code: VXR508TMP0118 This event code indicates "The system inlet temperature is less than the lower warning threshold."

Event code: VXR508SWC4008 This event code indicates "A firmware or software incompatibility detected between CMC 1 and CMC 2."

Event code: VXR508PSU0044 This event code indicates "Cannot obtain status information from power supply <number>."

Event code: VXR508STOR13 This event code indicates "Unable to set the operation mode of the newly inserted storage sled in slot <slot number> to Split Single or Split Dual Host, because the storage sled has only one PERC controller."

Event code: VXR508STOR18 This event code indicates "A Shared Storage device is detected in slots other than Chassis Slots 5 and 6. This configuration is not currently supported."

Event code: VXR508RDU0017 This event code indicates "The storage power redundancy is no longer available."

Event code: VXR508SWC4006 This event code indicates "A firmware or software incompatibility detected between system BIOS in slot <number> and CMC."

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

Event code: VXR508PWR1005 This event code indicates "The system performance degraded because of user-defined power capacity has changed."

Event code: VXR508TMP0120 This event code indicates "The system inlet temperature is greater than the upper warning threshold."

Event code: VXR508PDR7 This event code indicates "<physical disk> has degraded."

Event code: VXR508PSU0005 This event code indicates "The power input for power supply <number> is outside of the allowable range, but it is attached to the system."

Remediation is available for a vulnerability that could be exploited by malicious users to compromise the affected systems.

Step-by-step guide using vCenter to identify failed disk, remove disk or disk group, physically replace the faulted disk, mark the new disk as local, and add a new disk or disk group.

Event code: VXR508TMP0100 This event code indicates "The system board <name> temperature is less than the lower warning threshold."

Software-Defined Data Center (SDDC) Manager precheck failure Multi-Site Service fails due to pantheon service in a failed state. Service Availability: Check if the service is up and running using command "systemctl status pantheon." As root user, restart the service if required using command "systemctl restart pantheon" from SDDC Manager VM.

Event code: VXR508STOR5 This event code indicates "Redundancy lost.<VD/Enclosure Name>"

Event code: VXR508RDU0013 This event code indicates "Power supply redundancy is degraded."

Event code: VXR508PSU0002 This event code indicates "A predictive failure detected on power supply <number>."

Event code: VXR508SWC4004 This event code indicates "A firmware or software incompatibility detected between iDRAC in slot <number> and CMC."

Event code: VXR508VLT0302 This event code indicates "CPU <number> <name> voltage is greater than the upper warning threshold."

Event code: VXR508VLT0230 This event code indicates "The mezzanine card <number> <name> voltage is less than the lower warning threshold."

Event code: VXR508TMPS0100 This event code indicates "Inlet temperature is above warning level for extended duration."

Event code: VXR508VDR54 This event code indicates "<VD Name> initialization is terminated."

Event code: VXR508PDR211 This event code indicates "<physical disk name> has encountered storage medium error."

Event code: VXR508MEM6003 This event code indicates "Memory device status is non-critical. Memory device location: <location>, Possible memory module event cause: <cause>."

Event code: VXR508VLT0208 This event code indicates "The memory module <number> <name> voltage is greater than the upper warning threshold."

Event code: VXR508VLT0206 This event code indicates "The memory module <number> <name> voltage is less than the lower warning threshold."