VxRail Software

Este artigo apresenta a ferramenta VxVerify do VxRail e mostra como executá-la com sucesso em um ambiente do VxRail.

Este documento destaca as versões de código mínimas, recomendadas e mais recentes para produtos Dell Technologies Enterprise e Data Center Infrastructure. A Dell avalia e monitora cuidadosamente os dados de implementação de código para garantir que as versões de produtos atendam às nossas rigorosas expectativas para fornecer aos clientes produtos e soluções confiáveis.

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

Event code: VXR508FAN0014 This event code indicates "<fan name> RPM is greater than the upper warning threshold."

Event code: VXR508CBL0008 This event code indicates "One or more cables are missing from <controller name>."

Event code: VXR508AMP401 This event code indicates "Unable to read the < sensor name > sensor value."

O VxVerify no VxRail Manager pode tentar corrigir a falha do iDRAC e do iSM reiniciando o iDRAC e os serviços de nó relacionados ao VxRail.

Event code: VXR508CTL113 This event code indicates "The controller <controller name> is operating in Degraded Fault Tolerant Mode because of a mismatch between the encryption key setting of the controller and its peer controller."

Event code: VXR508BAT0031 This event code indicates "The system board battery status is unknown."

Event code: VXR508CTL202 This event code indicates "Unable to open the firmware and driver configuration file <file name> of <controller name>."

Event code: VXR508CTL208 This event code indicates "Unable to authenticate the entered passphrase for the <controller name>."

Event code: VXR508ENC13 This event code indicates "Unsupported configuration detected on <Enclosure Name>. <EMM0 1> <EMM1 2>"

Event code: VXR508CTL200 This event code indicates "The current firmware version <version number> is older than the required version <version number> for <controller name>."

Event code: VXR508FAN0018 This event code indicates "Enhanced Cooling Mode is not supported for fan <fan number>."

Event code: VXR500TMP504 This event code indicates "The <sensor name> sensor has detected an error with a value of <temperature> degrees Celsius."

A lock on virtual machine (VM) .vmdk file is held by NetWorker vProxy even if the backup is not running, maybe due to a HA/network event.

Este artigo descreve a resposta da engenharia do VxRail ao problema de vulnerabilidade de execução remota de código do Apache Log4j, conhecido como Log4Shell. Isso é descrito em CVE-2021-44228, CVE-2021-45046 e CVE-2021-4104 (artigo da Dell DSN-2021-007, artigo VMSA-2021-0028 da VMware)

Isso verifica as entradas do sistema de nomes de domínio (DNS) no banco de dados de configurações em relação ao arquivo "resolv.conf", para garantir que as entradas correspondam.

O banco de dados da lista de compatibilidade de hardware (HCL) do vSAN não está atualizado.

Gathering the stats.db files helps with diagnosis of VxRail performance cases and should be uploaded for offline analysis.

A verificação de integridade "vc_pw_char" verifica se a senha corresponde às regras do VMware, se as credenciais não puderem fazer log-in no vCenter.

Este é um arquivo de instruções passo a passo da KB sobre como fazer upgrade de um vCenter externo antes de fazer upgrade do VxRail Cluster.

During a VxRail LCM upgrade, the VxRail Manager UI may remain stuck in the “Upgrading” state for more than an hour with no visible progress and no new task updates. This occurs when resource issues prevent the VxRail Manager (vmware-marvin) service from fully initializing the LCM workflow, even though the upgrade completes in the background. Restarting the vmware-marvin service on the VxRail Manager VM allows the workflow to resume and the UI to reflect continued progress.

VCF has disconnected account from ESXi node account for root and built-in service account.

This enhancement makes it easier for both connected and non‑connected customers to access and copy important part information—such as part numbers and slot details—directly from event details in the Physical View UI. For connected customers, this information is automatically sent to Dell Support to help expedite issue resolution. Non‑connected customers can copy these details into the Dell Virtual Assistant to streamline issue resolution and support requests.

During Day 1 VxRail installation, enabling vSphere Lifecycle Manager fails because the VxRail Manager cannot prepare certificates. The failure is caused by a blocked SSH connection on TCP port 22 between VxRail Manager and the customer vCenter.

Ao fazer upgrade do VxRail da versão 7.0.2 para a 8.0+, ele pode falhar na fase 2 do upgrade do vCenter com a pré-verificação "vSphere ESXi Dump Collector Ports".

During an upgrade from versions earlier than 8.0.210 to 8.0.300+, the process hangs at the post‑upgrade health‑check stage because required network ports are blocked, leading to timeouts and failure.

The VxRail plug‑in creates iDRAC users with simple passwords that violate the iDRAC password policy, causing the privilege to appear as "idrac.users.role.UNKNOWN" and preventing login. The issue stems from a mismatch between iDRAC UI validation and API behavior in VxRail 8.0.320.

This article explains how to reset the vCenter Server Appliance (VCSA) root password without rebooting for versions 7.x and 8.x, covering SSH access, shell enablement, account unlock, password change, and verification.