VxRail E660

В этой статье представлен инструмент VxRail VxVerify и инструкции по успешному запуску VxVerify в среде VxRail.

В этом документе описаны минимальные, рекомендуемые и последние версии кода для корпоративных продуктов и инфраструктурных центров обработки данных Dell Technologies. Dell тщательно оценивает и контролирует данные по развертыванию кода, чтобы гарантировать, что выпуски продуктов соответствуют нашим строгим ожиданиям и предоставляют нашим заказчикам надежные продукты и решения.

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

Event code: VXR508FAN0014 This event code indicates "<fan name> RPM is greater than the upper warning threshold."

Event code: VXR508CBL0008 This event code indicates "One or more cables are missing from <controller name>."

Event code: VXR508AMP401 This event code indicates "Unable to read the < sensor name > sensor value."

VxVerify в VxRail Manager может попытаться исправить ошибки iDRAC и iSM, перезапустив iDRAC и связанные службы узлов VxRail.

Event code: VXR508CTL113 This event code indicates "The controller <controller name> is operating in Degraded Fault Tolerant Mode because of a mismatch between the encryption key setting of the controller and its peer controller."

Event code: VXR508BAT0031 This event code indicates "The system board battery status is unknown."

Event code: VXR508CTL202 This event code indicates "Unable to open the firmware and driver configuration file <file name> of <controller name>."

Event code: VXR508CTL208 This event code indicates "Unable to authenticate the entered passphrase for the <controller name>."

Event code: VXR508ENC13 This event code indicates "Unsupported configuration detected on <Enclosure Name>. <EMM0 1> <EMM1 2>"

Event code: VXR508CTL200 This event code indicates "The current firmware version <version number> is older than the required version <version number> for <controller name>."

Event code: VXR508FAN0018 This event code indicates "Enhanced Cooling Mode is not supported for fan <fan number>."

Event code: VXR500TMP504 This event code indicates "The <sensor name> sensor has detected an error with a value of <temperature> degrees Celsius."

This article outlines the response from VxRail Engineering to the Apache Log4j Remote Code Execution Vulnerability issue known as Log4Shell. This is described in CVE-2021-44228, CVE-2021-45046, and CVE-2021-4104 (Dell article DSN-2021-007, VMware article VMSA-2021-0028)

При этом записи системы доменных имен (DNS) в базе данных параметров сверяются с файлом «resolv.conf», чтобы убедиться в совпадении записей.

Gathering the stats.db files helps with diagnosis of VxRail performance cases and should be uploaded for offline analysis.

Команда диагностики системы «vc_pw_char» проверяет соответствие пароля правилам VMware, если учетные данные не упрощают вход в vCenter.

Это статья базы знаний с инструкцией по модернизации внешнего vCenter перед модернизацией кластера VxRail.

VCF has disconnected account from ESXi node account for root and built-in service account.

During Day 1 VxRail installation, enabling vSphere Lifecycle Manager fails because the VxRail Manager cannot prepare certificates. The failure is caused by a blocked SSH connection on TCP port 22 between VxRail Manager and the customer vCenter.

When upgrade VxRail from 7.0.2 to 8.0+, it may failed at stage 2 of upgrading vCenter with precheck "vSphere ESXi Dump Collector Ports".

During an upgrade from versions earlier than 8.0.210 to 8.0.300+, the process hangs at the post‑upgrade health‑check stage because required network ports are blocked, leading to timeouts and failure.

The VxRail plug‑in creates iDRAC users with simple passwords that violate the iDRAC password policy, causing the privilege to appear as "idrac.users.role.UNKNOWN" and preventing login. The issue stems from a mismatch between iDRAC UI validation and API behavior in VxRail 8.0.320.

This article explains how to reset the vCenter Server Appliance (VCSA) root password without rebooting for versions 7.x and 8.x, covering SSH access, shell enablement, account unlock, password change, and verification.

Event code: VXR508CTL13 This event code indicates "The <Controller name> cache has been discarded."

Event code: VXR508CTL215 This event code indicates "Redundant path disconnected on <Controller Name>."

Не удается перейти к следующему шагу при вводе учетных данных и параметров во время модернизации из-за недопустимого пароля учетной записи управления.

Event code: VXR508ENC4 This event code indicates "<Enclosure Name> firmware mismatch."