NativeEdge

本文档提供有关通过 ISO 介质安装 Ubuntu 24.04 LTS 服务器并将其配置为 Dell NativeEdge 见证节点的分步说明。安装使用最少的软件包来优化性能和安全性。 安装 Dell NativeEdge 见证节点的常用推荐方法是使用 NativeEdge 蓝图目录中提供的免费蓝图。本手动安装指南面向因特定原因必须手动创建 Witness 节点而非使用自动蓝图部署的用户。

Dell Automation Platform Orchestrator 会针对修改 Orchestrator 微分段的安全设置显示严重警报。显示警报代码 0x20010002。

NativeEdge 设备在 Dell Automation Platform （DAP） 的“Metrics”选项卡中显示“No Data Available”，因为 telegraf 处理程序依赖于来自 Orchestrator （EO） 的 machineID 消息，该消息可能缺失或延迟。

本文介绍已观察到的导致 NativeEdge 虚拟机 （VM） 上的内存超额订阅的部署方案。内存超额订阅可能导致无法访问受影响的虚拟机。

During a software bundle deployment, a host firewall may be configured to block traffic on Kubernetes pod network interfaces. This prevents the Container Network Interface (CNI) plugin from communicating. This issue is observed with McAfee Endpoint Security firewall but may occur with any host firewall solution.

The NativeEdge Outcome node firmware bundle is showing Unknown for PowerEdge systems which contain a HBA355i.

本文介绍如何检索日志包以对问题进行故障处理 戴尔自动化平台（本地）

本文介绍了 NativeEdge Orchestrator （NEO） 版本 3.1 以及 Dell Automation Platform 版本 1.0 - 2.1 中的问题。由于 mTLS 证书过期，系统变得不可用。此问题会影响已运行超过一年的系统。内部 mTLS 证书轮换机制未能及时续费证书，导致大范围的 Pod 启动失败，使 NEO 用户界面无法访问。此问题已确定会在初始部署大约一年后影响 mTLS 证书即将到期的所有系统。

在 NativeEdge 环境中，尝试在网关 3200 （EGW3200） 上为虚拟机 （VM） 启用 USB 控制器直通会导致虚拟机更新失败。此行为不是缺陷，而是平台限制，因为 USB 控制器直通仅在 EGW5200 设备上受支持，在 EGW3200 上不受支持。

在具有 RAID 控制器的 Dell PowerEdge 设备上，当通过 ECE 代理程序运行的 DisableRAID 作业完成且显示 SUCCESS 状态时，不会立即创建预期的存储卷（虚拟磁盘）。

XR5610 系统的固件升级过程失败，因为系统的固件版本与预期的固件锁定版本不匹配。Native Edge Orchestrator 固件更新服务找不到设备的有效升级路径，因为在可用目录中无法识别系统上的当前版本。

本文介绍在尝试使用门户 UI 使用自定义证书管理默认 TLS 证书期间出现的问题。

Dell Native Edge Orchestrator (EO) remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

A NativeEdge Asset reports an incorrect IP address for its management address.

This article explains an issue where the kernel drivers fail to detect one of the NVIDIA Graphics Processing Units (GPU) in a Unified Extensible Firmware Interface (UEFI) Virtual Machine (VM) configured with multiple GPU passthroughs.

When updating a deployment the Deployment_id input update requires manual change of the deployment to allow the update to complete.

Upload of Dell Private Cloud Zip bundle to Orchestrator fails with "Invalid blueprint" error.

A NativeEdge Virtual Machine (VM) which is imported from VMware vCenter with multiple disks can fail to boot.

This article describes a rare issue where the Deployments and Blueprints pages fail to load, resulting in a 504 Gateway Time-out error. The error is potentially related to the nginx server. A workaround is provided to resolve the issue.

This article describes the solution for Dell Automation Platform Upgrade Issues, when Portal Vault pods are not coming up.

This article explains Dell guidelines on company administrator assignment.

In rare circumstances, a NativeEdge Gateway with a 5g modem disconnects and is unable to reconnect until the device is rebooted.

In rare circumstances, it is possible that the device's staging partition free space is fully consumed.

This article explains how to assign an Initial Company Administrator.

This article explains how to promote Company Administrators.

Java-based containerized applications (such as Keycloak) may experience unexpected termination due to out-of-memory (OOM) errors when running on Linux Kernel 6.12 or later. This issue stems from changes in how the kernel exposes "cgroup" memory limits. These changes affect the Java Virtual Machine's (JVM) ability to detect and respect container memory constraints correctly.

On-Premises Dell Automation Platform installation fails with error: chunk N does not exist. (In this case, N represents a number. The number can be different per attempt.)

This article explains why a Litmus Edge deployment fails at the step Install_init_config and how to resolve the issue.

Attempting NativeEdge Endpoint 3.1 Server Firmware upgrade after upgrading the NativeEdge Endpoint Operating Environment (NEOE) to 3.1, can result in a Trusted Platform Module (TPM) resealing error.

Upgrading from NativeEdge endpoint firmware 2.2.0.0 to 3.0.0.0 triggers a stamping fallback to 2.2.0.0 due to a missing catalog in 3.0.0.0. This issue causes no functional impact.