PowerEdge R740XD

本文提供了下载戴尔 30 天和 90 天试用评估版许可证集合的链接，其中的许可证包括 iDRAC Enterprise、iDRAC Datacenter、Chassis Management Consoles (CMC) Enterprise、OpenManage Enterprise 和 OpenManage Integration。

以下文章提供有关 Dell PowerEdge 系统上的 BIOS、Lifecycle Controller 和 Integrated Dell Access Controller （iDRAC） 中可用的“语言”选项以及如何对其进行更改的信息。

This article provides information about STOR042 error while creating a Virtual Disk.

Steps necessary to configure the QLogic FastLinQ 41262 network adapter as defined in the "Microsoft HCI Solutions from Dell Technologies" Deployment Guide to enable RDMA, iWARP, and disable DCB.

The VM does not turn on after configuring PCI Device passthrough on the ESXi host and adding the device to the VM. It gets stuck at 80% and then results in an error "total number of pages needed (4206594) exceeds the limit (917504)."

This article provides information about creating an IMG or ISO file with the PERC drivers, and mounts it during the Windows operating system installation.

Systems containing an enterprise SSD or NVMe device which are powered off for a duration of more than 3 months may exhibit errors or drive faults due to data retention limitations within the device.

Dell Repository Manager (DRM) 3.4 may stop at the spinning wheel screen for preferences page in upgrade scenarios.

Upgraded ESXi 7.0 U3 FC HBA device found additional vmhba 64,65,66,67 but no physical impact. To identify whether it is an HBA Enumeration problem, you have to compare between the old and new logs to verify whether there have HBA device name change happened.

EasyRestore IDM 发生故障并且无法手动安装 IDM。

The article explains what is a foreign configuration is and how to troubleshoot it.

The article is a solution to fixing the issue of the system asking for eh product key after making a hardware change.

This article explains how to generate a troubleshooting log for PowerVault TL2000/TL4000 using the graphical interface for recent firmware or Telnet for older versions.

This article provides information about how to set up your network so the CMC and the iDRAC can dynamically update the DNS.

Dell Enterprise solid state drives are developed to precisely match the Dell Enterprise systems and to provide an optimal production environment.

Process Monitor is an information collection tool designed to gather registry and file activity within Microsoft Operating System environments. The information below explains how to setup Process Monitor to run automatically at specific times aiding in troubleshooting application and operating system failure events. How to set up and automate the Microsoft Process Monitor for Windows to simplify application and system troubleshooting. Learn Process Monitor capabilities, setup steps, and how to manage log files for streamlined issue resolution.

本指南介绍在戴尔服务器上安装和配置 VMware ESXi 的基本步骤。本文还介绍了升级、降级和组合 VMware 许可证，以及安装 VMware 驱动程序、戴尔工具和生成 VMware 支持包。

The Dell iDRAC9 IPv6 Link Local and StateLess Address Auto Configuration (SLAAC) Addresses change after upgrading to iDRAC9 firmware 5.10.00.00 or later releases.

This article is intended to clarify when iDRAC9 firmware 5.00.20.10 should be installed on Dell EMC PowerEdge servers.

OpenManage Server Administrator 10.1.0 for RHEL7, RHEL8, and SLES15 requires the 10.1.0.1 patch for specific 15G, 14G Intel, and AMD PowerEdge platforms that now ship with or have parts replaced with revised PERC 10, PERC 11, and Host Bus Adapter (HBA) controllers due to supply chain issues. Since these revised controllers only support specific server models, the OMSA 10.1.0.1 patch cannot be posted to the Dell Linux repository and must be installed separately.

The install stops at the Windows Splash screen on Server startup when installing a Windows Update package.

This article provides the steps necessary to transfer Flexible Single Mast Operation (FSMO) roles between domain controllers. Also, learn how to move FSMO roles, change the schema, and manage all FSMO roles efficiently to ensure a continuous Active Directory.

This article details the steps required to use WinRE to load drivers for a network card and connect to a network share to backup files from an unbootable server.

如何捕获 Storport 跟踪以帮助对存储延迟问题进行故障处理。

This is a brief demonstration of how to use logman, relog, and typerf to collect performance logs useful in troubleshooting slow performance conditions.

Dell customers may report an unrecoverable hardware error on POST with configurations including a certain mix of Mellanox firmware, BIOS, and iDRAC versions. While the issue was reported on VMware with CX-5 cards, other Dell/Mellanox hardware may be affected.

Steps on how to clear NVRAM using Lifecycle Controller remotely using the retire and repurpose process.

Does running a CPU at high temperatures for extended periods of time impact its quality and lifespan?

This article provides information about how to boot past the Driver Health Manager Screen.

This article provides information about Dell Boot Optimized Storage Solution (BOSS) PCIe cards. It also provides instructions for installing Windows, Red Hat, SuSE, Ubuntu, and related Linux distributions onto these cards.