PowerEdge R760XA

GRUB （Grand Unified Bootloader） 中的一组已披露漏洞（称为“BootHole”）可允许绕过安全启动。

本文介绍如何下载、安装和使用戴尔 PowerEdge RAID 控制器 （PERC） 命令行界面 （CLI） 实用程序来管理 RAID 控制器。在运行 Windows、Linux 或 ESXi 的主机上，PERC 系列 8 和更高系列控制器支持该实用程序。PERCCLI 还可以提取 RAID 控制器日志，其中包含的信息使您或戴尔技术支持可以确定 RAID 控制器和连接的存储设备的状态，以缩小可能的错误源。

This article provides information about Dell Boot Optimized Storage Solution (BOSS) PCIe cards. It also provides instructions for installing Windows, Red Hat, SuSE, Ubuntu, and related Linux distributions onto these cards.

Domain Name System (DNS) resolving the local hostname may return the internal IP address of the USB Network Interface Card (NIC) passthrough device enabled by iDRAC Service Module (iSM). This can cause issues with internal network devices configured with 169.254.x.x nonroutable addresses. The metric of the USB NIC device should be manually set to a high number so that internal network devices take precedence.

Dell guidance for iDRAC Service Module (iSM) Lifecycle Controller (LC): iDRAC9 Firmware Inventory page indicates iSM Installer at version "0," "Install Service Module" button disabled. For specific information about workaround and next steps for resolution, see this guide.

This article provides a step-by-step guide to configure the Integrated Dell Remote Access Controller 9 (iDRAC9) and Lifecycle Controller network settings.

The article explains why OMSA 9.4.0 or earlier will not install on VMware ESXi 7.0, the upgrade impact from 6.x to 7.0, and a workaround.

Dell EMC 对常见漏洞和披露 （CVE-2019-9506） 的回应

Dell EMC guidance to mitigate risk and resolution for the iDRAC multiple vulnerabilities. For specific information about affected iDRAC versions and next steps to apply the updates, see this guide.

本文提供了下载戴尔 30 天和 90 天试用评估版许可证集合的链接，其中的许可证包括 iDRAC Enterprise、iDRAC Datacenter、Chassis Management Consoles (CMC) Enterprise、OpenManage Enterprise 和 OpenManage Integration。

这是一个固件目录，其中包含基于戴尔自定义 ESXi 8.X 分支映像的选定 Dell VMware vSAN 就绪型节点的经过验证和认证的固件堆栈。

戴尔的固件目录，适用于戴尔 VMware ESXi 8.x 版本的自定义版本。当戴尔自定义的 ESXi 版本与相应的固件目录一起使用时，将达到端到端所需的状态。

这是一个固件目录，其中包含基于戴尔自定义 ESXi 9.X 分支映像的选定 Dell VMware vSAN 就绪节点的经验证和认证的固件堆栈。

Dell OpenManage Mobile (OMM) is a mobile application for monitoring and managing Dell PowerEdge servers, MX7000 chassis, and other data center devices from Android and iOS devices. This support article provides helpful insights for this mobile application and a step-by-step guide to get started.

This article outlines how to create a firmware baseline, view compliance reports, and apply updates in Dell OpenManage Enterprise.

Solution for server hanging during POST with error UEFI136 due to inaccessible Lifecycle Controller firmware during CSIOR execution

This article provides information about how to modify Automated System Recovery (ASR) settings in OpenManage System Administrator (OMSA).

The Dell PowerEdge Knowledge Base provides support solutions, error messages information, and troubleshooting guides about Dell Severs.

This article explains how to use commands to gather smart logs.

This document answers questions about SupportAssist Enterprise.

This article guides users through diagnosing and resolving GPU thermal throttling and detection problems on Dell PowerEdge servers. It covers checking GPU temperature and throttle status, reviewing system logs, improving cooling, verifying hardware installation, updating BIOS/iDRAC and GPU firmware, and running diagnostic utilities such as nvidia‑smi and DCGM.

The article describes how to troubleshoot network connectivity issues for network cards.

This article explains how to find supported memory configuration for your PowerEdge server.

The article describes updating Dell PowerEdge server firmware through Integrated Dell Remote Access Controller (iDRAC) 7, 8, 9, or 10. It details downloading the firmware image, logging in to the iDRAC web interface, uploading the image for installation, and managing pending updates.

This article explains different methods to reset, power drain or perform a virtual AC cycle.

本文提供了有关如何在 PowerEdge 服务器上禁用 C-State 和 C1E 的信息。

本文提供有关在 OMSA、系统设置页面和 iDRAC 界面中识别硬盘属性的信息。

本文介绍如何在Dell PowerEdge服务器上恢复BIOS默认设置。此过程可能对其它戴尔产品有效。

本文讨论用于安装 Dell PowerEdge 服务器的固定导轨和滑动机架导轨之间的区别。了解可实现最佳机架配置的安装选项、说明和资源。

RecoverPoint 5.1.2 重新添加了一项功能，该功能可扫描 vCenter 以查找虚拟机及其位置，并生成有关未受保护的虚拟机的警告。