PowerFlex custom node HW

有关 Dell Technologies VxFlex 就绪型节点产品的客户可更换部件 （CRU） 视频的信息

本文包含有关 Dell Technologies VNX 和 VNXe 产品的客户可更换部件 （CRU） 视频的信息。

尝试升级 PowerFlex 生产或 MDS 网关资源失败，指出它无法连接到特定 IP 地址上的 LIA。

有关 Dell Technologies PowerProtect 和 Data Domain 产品的客户可更换部件 （CRU） 视频的信息

有关 Dell Technologies Powerflex 产品的客户可更换部件 （CRU） 视频的信息

有关 Dell Technologies ECS 产品的客户可更换部件 （CRU） 视频的信息

PowerEdge servers crash with PCIe fatal errors while updating Kioxia CM6 NVMe drive firmware.

When trying to register or de-register Alert Connector, PFxM UI shows error (500) or (VXFM0004)

Dell Samsung Serial Attached SCSI (SAS) PM1653 and PM1655 solid state drives may report excessive Sense Key faults 0x3, 0x11, 0x0, or 0x4, 0x29, 0x4. These faults have the potential to cause unexpected drive issues.

戴尔为我们的许多硬件系统提供了客户可更换部件 (CRU) 计划。CRU 计划允许客户更换指定的硬件组件。有关为特定硬件系统指定为 CRU 的硬件组件的列表，请转至戴尔保修和维护页面。

This article contains the initial steps to take on all PowerFlex performance-based issues when observing performance degradation, low Input Output Operations Per Second (IOPs), low MB per sec, or high latency.

本文介绍如何将内部 HTTP 共享用于 4.x PowerFlex Manager 版本认证矩阵 （RCM）、Intelligent Catalog （IC） 和 ISO 上传。

文章概述了 PowerFlex 节点在启动期间、中断后或安装时报告“非易失性双列直插式内存模块 （NVDIMM） 电池未就绪”的症状，这是由于电池未充电所致。

详细介绍了适用于版本 4.X 的 PowerFlex 管理平台 （PFMP） 虚拟机的正常重新启动，包括标记、耗尽和重新启动 MVM，同时保持两个节点处于活动状态并检查 PostgreSQL 运行状况。在此过程的范围内，MVM1 是 postgres 领导者。最后耗尽并重新启动。

本文介绍了 PowerFlex 解决方案中的 MDM 群集的详细信息。

User has one node in the system where the NVDIMM battery status reports as 'Unknown' but that is not one of the three options listed for the status.

PowerFlex components such as the MDM are disconnecting and reconnecting quickly and frequently. Lost connection followed by connected found in MDM events Connecting after 80-190ms

以下过程说明如何在基于 Debian 的服务器上手动安装外部 SDC。 以下过程中的步骤与 Debian/Ubuntu 操作系统相关，包括 Proxmox 虚拟环境。

How to clear device errors on Dell PowerFlex using Presentation Server

In SLES15, the service name was changed to "sdc", from the commonly used service name "scini".

PowerFlex versions 3.0.1.6, 3.5.1.4, and 3.6.0.2 and lower have a bug that causes the rotation mechanism of the eventlog.db file to not work at all, which causes a continuous increase in the file size.

This article describes the basic steps required to collect support data from a Kubernetes-based PowerFlex Manager Platform (PFMP) system and the PFMP installer. Support data is collected using a standalone, single-file utility, pfmp_support. As such, the utility's executable can be copied to and run on the host from which support data is to be collected. Using this utility does not require a functioning PFMP. As such, support data can be collected during PFMP installation or when the PFMP UI is inaccessible.

This procedure describes how to add another IP address subnet for use by the MDM cluster. This addresses scenarios where the MDM cluster uses a single network, or when an existing network must be replaced by a different one or to simply add another network (to an already multiple-network cluster). The MDM supports up to eight networks.

清除设备错误。

在配置了 NVMe 设备的基于 Linux 或基于 ESXi 的 SVM 服务器 PowerFlex 系统中检索操作系统设备路径。

Retrieve the OS device path for a specific virtual drive (VD) in a Linux-based, Windows, or ESXi running PERCCLI server PowerFlex system with an H730p/H740p controller.

Configure network throttling to control the flow of traffic over the network.

在 ESXi v7.x 上运行的 SDC 上使用 Installation Manager（网关）收集日志超时并失败。

PowerFlex Manager Platform (PFMP) crashes after restarting network services using "systemctl restart network."

本文介绍如何将外部状态的操作系统磁盘转换为 BOSS 卡中的 RAID 1 中使用。