PowerFlex custom node R660

不确定更新 PowerEdge 系统中特定组件固件的过程？在此特定文章中了解应该怎么做。

本文详细介绍了在 PowerEdge 服务器上可能会出现的电源装置 (PSU) 问题的故障排除步骤。

Spontaneous reboot with error "The System board BP1 PG voltage is outside of range"

This article explains what a predictive drive failure (error code PDR16) means, why it occurs, and provides step-by-step instructions to troubleshoot and resolve the issue. It covers recommended actions such as backing up data, updating firmware, and replacing the disk if necessary to ensure storage health and prevent data loss.

All PowerFlex Node's date and time need to be synched with the MVMs for mTLS to work.

Dell PowerEdge Toshiba MG08 和 MG09 硬盘可能会遇到不间断后台介质扫描 （BMS），从而导致 I/O 错误或超时。

无法应用 PowerFlex 许可证，收到错误代码 ASMCOMMONS.0070。

从 PowerFlex Manager 平台 （PFMP） 申请许可证失败，并显示错误“许可证密钥无效或与此版本不匹配 （ASMCOMMONS.0049）”。

Dell VxFlex Ready Node and PowerFlex Custom Node remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

Dell VxFlex Ready Node and PowerFlex Custom Node remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

Dell Micron 7450 and 7500 Non-Volatile Memory Express solid state drives may encounter drive initialization failure due to a firmware issue, resulting in the solid state drives being unrecoverable.

本文概述了使用生命周期控制器准备系统以进行报废或重新调整用途所需的操作。

本文详细介绍了导致硬盘故障的各种原因。

当初始 BIOS 版本为 2.2.7 或 2.2.8 时，某些第 16 代 PowerEdge 系统（例如 PowerEdge R760 和 R760xs）上的交流电源恢复功能无法按预期运行。

配备 Dell Micron 7500 NVMe 固态硬盘的 PowerEdge 服务器可能会表现出较高的风扇 RPM 速度。

本文将指导解决 MDS Powerflex 系统中由于缺少 MDM IP 地址（如 MDM 上的 MDS kubectl 日志和 LIA 日志所示）导致的清点问题。

在某些 iDRAC9 固件版本中，LCWipe 命令会产生不良副作用。建议在停用服务器硬件或重新调整服务器硬件用途时，使用 SystemErase 功能安全地擦除配置和终端用户数据。

Since the introduction of Clustered VMDK on VMFS datastores, applications like Windows Server Failover Cluster (WSFC) no longer require Raw Device Mappings (RDMs) to use SCSI‑3 persistent reservations (SCSI3‑PR). Because of this, Broadcom does not offer RDM support for the NVMeoF protocol. Customers using RDMs with the SDC who want to move to NVMe/TCP must convert those disks to VMDKs on a VMFS datastore with the Clustered VMDK property. This conversion cannot be done with Storage vMotion, so applications such as WSFC will incur downtime. This KB explains how to perform the WSFC conversion at a high-level. It also covers converting an Oracle RAC environment from RDMs to shared VMDKs on NVMe/TCP, even though Oracle RAC does not require SCSI3‑PR. Oracle RAC can run on an SDC‑based VMFS datastore, but because PowerFlex does not support Clustered VMDK on SDC‑based VMFS, SCSI3‑PR‑dependent applications cannot use that configuration. Oracle RAC explanations are also high-level.

本文包含有关 Dell Technologies VNX 和 VNXe 产品的客户可更换部件 （CRU） 视频的信息。

本文讨论具有特定网卡配置的服务器需要主动干预才能更改的 ESXi 7.0 U3 问题。

The Dell Nautilus Firmware Update Utility is flexible and simple to use as it contains all the latest, relevant firmware updates for hard drives in your Dell server.

PowerEdge connected Dell NVMe SSDs with the Limited Retry (LR) bit set may experience an increase in failures due to elevated media and data‑integrity error rates.

本文详细介绍了在 ESXi 上未启用安全启动时在 TPM 上启用 ESXi 警报抑制的分步过程。

戴尔为我们的许多硬件系统提供了客户可更换部件 (CRU) 计划。CRU 计划允许客户更换指定的硬件组件。有关为特定硬件系统指定为 CRU 的硬件组件的列表，请转至戴尔保修和维护页面。

在复制初始拷贝期间，卷传输的大小可能会报告为实际卷大小的 5-10 倍。

在 PFxM UI 中，有一个警报，指出未检索来自 MDM 的事件。

戴尔 Micron 9550 E3。NVMe 驱动器活动 LED 指示灯熄灭几秒钟。

如果您的系统出现问题，我们建议您在联系戴尔支持之前收集系统日志以加快支持流程。本文介绍了一些可用的关键工具，包括 SupportAssist Enterprise，这是适用于您的 Dell PowerEdge 系统的最全面的日志收集工具。

本文提供了建议的步骤，以帮助对 Dell PowerEdge 服务器上的内存相关事件进行故障处理。

正常导航期间，UI 页面加载缓慢。