PowerFlex custom node

本文提供了 PowerFlex 机架、PowerFlex 设备、PowerFlex 自定义节点、VxFlex 就绪型节点、PowerFlex 软件、PowerFlex for AWS、PowerFlex for Azure 和 CloudLink 的文档链接。

戴尔为我们的许多硬件系统提供了客户可更换部件 (CRU) 计划。CRU 计划允许客户更换指定的硬件组件。有关为特定硬件系统指定为 CRU 的硬件组件的列表，请转至戴尔保修和维护页面。

本知识库文章简要介绍如何执行 WSFC 转换。它还介绍了如何将 Oracle RAC 环境从 RDM 转换为 NVMe/TCP 上的共享 VMDK，即使 Oracle RAC 不需要 SCSI3-PR 也是如此。Oracle RAC 可以在基于 SDC 的 VMFS 数据存储区上运行，但由于 PowerFlex 不支持基于 SDC 的 VMFS 上的群集 VMDK，因此依赖 SCSI3-PR 的应用程序无法使用该配置。Oracle RAC 的解释也是概括性的。

客户使用 PowerFlex SDR 复制来测试故障切换，但在 Oracle Linux 服务器上的多路径 -ll 输出中，目标卷装载了“RO”。

PowerFlex 3.x UI 无法访问，在尝试打开时收到 404 错误。可从 CLI 访问 PowerFlex 3.x。

The RestAPI call to switch MDM ownership through the Gateway fails with a timeout.

Dell Storage Simple Support Matrices on E-Lab Navigator provide the optimal interoperability for your storage solution.

Event-History pod 将进入 Crashbackoffloop，以防它无法连接到 active-mq-activemq-postgres pod。

Dell PowerFlex remediation is available for the Apache Log4j Remote Code Execution Vulnerability that may be exploited by malicious users to compromise the affected system. Dell recommends implementing this remediation as soon as possible in light of the critical severity of the vulnerability.

PowerFlex Manager UI becomes inaccessible.

PowerFlex Manager Platform UI login failure - "Failure to initialize," "User has no permissions to view this page"

PowerFlex Manager generates a 2-year default self-signed SSL certificate when it is deployed. You can replace this default SSL certificate by generating a CSR, having it signed by a trusted certificate authority and uploading the signed certificate to PowerFlex Manager. If you are not using a trusted certificate authority and must renew the default self-signed SSL certificate, then you can use the following instructions.

无法使用 PowerFlex Manager 更改节点操作系统密码，并显示错误 VXFM00685。在 PowerFlex ManagerUI 中为节点更改密码后，错误显示故障。

Disk devices attached or configured to SVM or SDS nodes are missing Serial Number information and are not listed in the /dev/disk/by-id directory.

无法使用 PFxM 升级交换机操作系统。

无法完成 PowerFlex MDS 系统的添加现有资源组向导。

成功升级 PFMP 后，CloudLink （CL） 代理程序具有处于已连接和已断开连接状态的重复条目。

The 4.x PFxM UI is not loading because the PowerFlex Management Platform "PFMP" pod SDNAS gateway is not in a healthy state.

在 PFxM UI 中，有一个警报，指出未检索来自 MDM 的事件。

本知识库文章 （KBA） 概述了识别 PowerFlex 系列中版本的各种方法，仅包括 PowerFlex 解决方案和软件。

This article provides links to PowerFlex custom node technical documentation.

删除并重新添加资源组。

14‑gen Ready Nodes with ≥12 DIMMs can reboot, recorded in iDRAC as a BP1 power‑good voltage out‑of‑range error; signal noise on the backplane power cable creates loss alerts, risking data loss.

多个 PowerFlex 机架或设备存储节点报告电池性能下降。 iDRAC 显示错误“NVDIMM 电池未就绪，因为电池未充满电或发生瞬时电池事件”。

The "Software Serial ID" or "SWID" (usually starts wit ELMSIO....) is used to open Service Request for PowerFlex, and to start software renewal process. If the Software Serial ID is not available, you can also create cases using the "System Serial number" (usually starts with "ELMVX....)

The following procedure explains how to manually install an external SDC on a Debian-based server. The steps in the procedure below are relevant for Debian/Ubuntu operating systems, including Proxmox Virtual Environment.

PowerFlex Manager 报告与“STORAGE_POOL_UNBALANCED”、“NOT_ENOUGH_FAULT_UNITS_IN_SP”和“CONFIGURED_SPARE_CAPACITY_SMALLER_THAN_LARGEST_FAULT_UNIT”相关的错误警报。

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

在仅存储 （SO） 和仅计算 （CO） 资源组 （RG） 新部署或升级到 4.6.1 期间和之后，多个 Pod 不断重新启动。

本文介绍如何将内部 HTTP 共享用于 4.x PowerFlex Manager 版本认证矩阵 （RCM）、Intelligent Catalog （IC） 和 ISO 上传。