VxFlex Ready Node

本文档重点介绍 Dell Technologies 企业和数据中心基础架构产品的最低代码版本、建议代码版本和最新代码版本。Dell Technologies 会仔细评估和监控代码部署数据，以确保产品版本符合我们严格的期望，为客户提供可靠的产品和解决方案。

戴尔为我们的许多硬件系统提供了客户可更换部件 (CRU) 计划。CRU 计划允许客户更换指定的硬件组件。有关为特定硬件系统指定为 CRU 的硬件组件的列表，请转至戴尔保修和维护页面。

本文介绍如何删除孤立的 sdnas-gw NATS 消费者

Many users have CA policies that prohibit IP addresses in the Certificate Subject Alternative Name (SAN) and only Fully Qualified Domain Names (FQDNs) are allowed. The lack of IP addresses in the certificate conflicts with PowerFlex Manager logic when it comes to the zipper or yum repositories that we use. PowerFlex 4.8 has a new feature to support stringent rules for certificates. This is a new security mode within package manager. Now, when creating a custom certificate or the Powerflex appliance certificate, the customer can choose between Standard and Stringent modes. The Standard Mode does not require DNS, but includes IPs and FQDNs, and the Stringent mode in which PowerFlex Manager converts the ingress IPS to FQDNs and then builds the repo URLs.

This article explains how to troubleshoot the dial home alert SDC_MULTIPLE_DISCONNECTIONS_FROM_SDS -SIO01.07.0000007

This article explains how to troubleshoot the alert PFX00102.0000207 - The PowerFlex management platform message bus health diagnostic failed.

The article outlines VMware Security Advisory (VMSA) 2025‑0013, which lists four critical ESXi 7.0 8.0 flaws and gives update guidance, needed RCM IC versions and upgrade routes.

Storage Only nodes deployment may fail during LIA installation because ISM package generates an incorrect firewall rule which can be fixed by editing the Malformed firewall rule

Upgrade from version 4.8.0.1 to 5.1.0.2 due to database unclean shutdown which can be fixed using the script attached to this article

After upgrading Powerflex from 5.1.0.1 to a 5.1.0.2 CloudIQ continues to display the pre-upgrade PowerFlex Manager details because supportassist get discoonected which can be fixed by restarting the CloudIQ colelctor pod

17G Nodes may not power on during NDU due to a bug linked to a specific firmware version which can be solved by cold reboot

PowerFlex Manager 捆绑包可能是繁重的文件，在收集和查看它时可能会导致延迟。这些是收集 asmmanager 日志、Tokyo 实用程序捆绑包和部署日志的步骤。所有这些文件对于诊断大量问题非常有用，收集它们比收集整个 PFxM 捆绑包更快。

This article explains step by step how to do an NVMe device replacement and do the RDM config in the SVM to be correctly mapped to the ESXi host

This article explains how to fix RG displayed incorrect switch mapping during the upgrade.

本文介绍了管理员指南中关闭 PowerFlex 设备的分步过程

本指南概述了 PowerFlex 升级团队服务资格、支持的 PowerFlex 4.5 或更高版本、升级前检查、文件和跳转箱准备以及升级的许可注意事项。

使用此过程在 Cisco Nexus 或 Dell PowerSwitch 交换机上配置 SNMP。

要将 SNMP 警报转发到 BigPanda 等站点，在每个资源上单独配置管理虚拟机的负载平衡器 IP 地址。

This section is to assist you in responding to unexpected power loss. This Article is a general guideline and has not been tested in every scenario. If at any point there is a failure, contact Dell Technologies Support.

This article provides quick links to Dell PowerFlex for AWS and Dell PowerFlex for Microsoft Azure technical documentation.

将操作系统升级到 SLES 15 SP4 后，PowerFlex 网关 （GW） 停止与 MDM 通信。在升级到 2022 年之后发布的版本的操作系统上，可能会出现相同的行为。

本文介绍如何重新启动 PowerFlex 系统的不同节点类型

PowerFlex 管理平台 （PFMP） 生成省略发送服务器主机名的系统日志消息，这违反了标准格式并影响审核日志保留。

在 HCI 升级期间，运行 Lenovo OEM VIB 到 ESXi 8 升级的 ESXi 7 主机失败

在 vTree 迁移期间，运行 PowerFlex 3.6.7 的 SDS 节点可能会崩溃，从而导致数据不可用 （DU） 事件。在较早的 PowerFlex 版本中，迁移过程可能会无限期停滞，无法完成。

This article explains steps to do OS Conversion while node is in BIOS mode.

本文介绍了 PowerFlex 版本矩阵，以及如何关联各种产品包的指导。

本文介绍如何对警报 PFX00102.0000206） 进行故障排除 磁盘空间诊断失败。

只有 Panduit G5/G6/G7 配电装置 （PDU） 有日志可用。在此之前的每一代都没有此功能。

生命周期模式允许在不受支持的配置中对节点组件进行生命周期管理。在生命周期模式下，服务支持运行状况和合规性监视、服务模式和无中断升级操作。所有其他服务操作均被阻止。