VPLEX VS6

本文档重点介绍 Dell Technologies 企业和数据中心基础架构产品的最低代码版本、建议代码版本和最新代码版本。我们会仔细评估和监控代码部署数据，以确保产品版本符合我们严格的期望，为客户提供可靠的产品和解决方案。

戴尔为我们的许多硬件系统提供了客户可更换部件 (CRU) 计划。CRU 计划允许客户更换指定的硬件组件。有关为特定硬件系统指定为 CRU 的硬件组件的列表，请转至戴尔保修和维护页面。

This article talks to the issue where in the legacy Flash GUI, GeoSynchrony pre-6.2, where listing the Storage-Volumes fails to retrieve the volumes for the cluster if the cluster names were renamed from the default names, Cluster-1 and Cluster-2 (if a metro), to a user preferred name. This was also seen to be an issue with the HTML5 GUI in the 6.2.x version as well.

VPlex 5.4 using VIAS to integrate VNX storage is show incorrect storage pool size after a pool expansion was done on the connected VNX array. New free space added to the storage pool on the array is not reflected in the VPlex CLI or GUI storage-pools context.

本文介绍了使用戴尔支持页面打开服务请求 （SR） 的过程。 为您的戴尔设备快速获取帮助。无需再等待等待。不再有技术难题。 戴尔可让您通过设备或我们的支持网站轻松解决问题、安排维修或获取支持。

本文讨论了 Cluster-1 和 Cluster-2 之间存在不同规则集名称的问题。

This article describes the backups rotation and the meta data backups renaming. <[HK] - Give detailed description/summary>

VPLEX UI displays the anatomy of a distributed device as containing an extent provisioned from the remote site.

This article talks about how to solve an error message seen while listing RecoverPoint context listing in VPLEX.

After an upgrade to GeoSynchrony 6.0 Service Pack 1 Patch 2 (6.0.1.02.00.03), distributed virtual-volumes have a service status of "disconnected". This will not affect IO, and the customer should not see DU due to the issue.

This article directs you to the SolVe document on 'Troubleshooting site replacement issues'.

This article details the steps to generate a SolVe Desktop procedure to address issues with VIAS.

KBA being archived

本知识库文章概述了如何在单引擎 VPlex Metro 上对 WAN-COM 端口进行分区。

在VPLEX_Metro配置中，当发出“rp validate-configuration”时，它会报告 RecoverPoint 启动器登录时没有相应的 RPA 注册。这是由于 RPA 未在两个管理服务器上注册导致的。

本文介绍如何分配初始公司管理员。

本文介绍如何升级公司管理员。

本文介绍了戴尔关于公司管理员分配的指导准则。

AppSync 无法重新链接到已装载的目标设备。

Performance impact may result when a high rate of vStorage API Array Integration (VAAI) UNMAPs occur on a director (more than 400 unmaps per second). Director CPU usage spikes to 100%, front-end domain latency spikes, and front-end latency for non-UNMAP operations (reads and writes) may increase beyond acceptable levels. Disable UNMAP operations from the host or set the thin-enabled setting to false (this rejects unmaps from the host.)

This article talks to an issue introduced in the new UDCOM feature that tracks lost pings count not being aged properly leading to the affected path not being used for IO traffic.

After a power outage, Management server reboot, or if the Management Console Service is restarted while the VPN is down, VPLEX reports "unreachable directors"

During the I/O forwarding phase of NDU, VPLEX might experience a total cluster outage If an Initiator logs into the same target port with different nPortId's. In a GenU action, if an initiator logs into the same target port with a different nPortId, this can also impact the GenU. This article is asking users to ensure that if they are using NPIV, that they enable persistent FCID on their SAN Switches so that when host HBAs log back in during the NDU, or if a host logs out and back in during a GenU, they do so with the same FCID they had previously.

The checksums of the package file do not match due to the parent directory folder owner:group value incorrect.

This KB article outlines how to identify a 'proceed conditionally' nmg/117 event for Cluster Witness

本文介绍如何显示符合用于创建 VPLEX 活动元数据卷和/或元数据备份卷的标准的存储卷。

VPLEX 日志显示“-port 70 fc-xx （xx-FCxx）： frame dropped： command 0x18.”由不在 FC-LS-2 中的 FC 扩展或 FC 基本链路服务 （0x18） 到 RDP 轮询引起

本文讨论了 VPlex 控制器文件系统的 /cores 分区填满空间的事件。

VPlex 分布式设备遇到性能问题

本文讨论了以下问题：当分支重新连接到镜像时，show-use-hierarchy 命令报告没有具有该名称的设备。