Disk Library for mainframe

DLm VTE 或 VTD 应用程序文件句柄泄漏可能导致打开太多文件，这可能导致 Virtuent 停止处理磁带。这可能会在 Virtuent Console (VT) 日志中生成类似于以下内容的错误，并且还会保存到 /var/bti/log/btilog： DLm0839E: Unable to assess space for /tapelibX/FS_XX (scandir error): Too many open files DLm0034I: sudo: error while loading shared libraries: libselinux.so.1: cannot open shared object file: Error 24 DLm0261E: Device BB17 volume P10130 Unable to set short-term lock: Too many open files DLm0810E: Command failed: crc32 /opt/webconsole/backup_config/current.json: Too many open files DLm0647E: Internal Error in opening /etc/mtab: Too many open files DLm0810E: Command failed: btitool show paths port=1: Too many open files

Site planning and preparation are vital to a successful DLm deployment. Considerations include environmental variables, floor load-bearing capacities, bay positioning and power cabling and connectors.

This document describes the aspects of sizing, capacity and performance, which need to be considered when designing a DLm solution. Sizing for capacity takes into account the total amount of data that a customer plans on storing on the DLm. Sizing for performance considers the customer’s backup windows and RPOs. This paper provides guidelines for both aspects of the sizing exercise.

Describes how to install a SVR-I2U-R2312 server in a cabinet or rack. Also describes how to replace a disk drive assembly, a power supply module, and the entire server.

This document provides information about the physical and environmental requirements, floor placement, connectivity, and power requirements to plan the installation of DLm systems.

This guide provides information on the features, performance, and capacities of EMC Disk Library for mainframe (DLm). It also includes installation and configuration information that is required for ongoing operation. DLm provides IBM tape drive emulation to the z/OS mainframe utilizing disk storage arrays in place of physical tapes.

This document provides information about the physical and environmental requirements, floor placement, connectivity, and power requirements to plan the installation of DLm systems.

This guide provides information on the features, performance, and capacities of EMC Disk Library for mainframe (DLm). It also includes installation and configuration information that is required for ongoing operation. DLm provides IBM tape drive emulation to the z/OS mainframe utilizing disk storage arrays in place of physical tapes.

This guide provides instructions for preparing the site and unpacking EMC Disk Library for mainframe. It provides details such as site specifications, dimensions and service area requirements, shipping dimensions and clearance requirements, and the unpacking procedure.

This technical note discusses the procedures and best practices for configuring, monitoring, and managing the disk space available with the Disk Library for mainframe (DLm).

This document explains how to implement the CLARiiON Disk Library in an iSeries environment.