Intel PRO Family of Adapters

本文介绍如何对网卡的网络连接问题进行故障处理。

本文提供有关如何验证网络接口卡 （NIC） 是否与 PowerEdge 服务器兼容的信息。

本文介绍了使用戴尔支持页面打开服务请求 （SR） 的过程。 快速获取有关您的戴尔设备的帮助。不再需要等待。不再有技术难题。 戴尔让您可以轻松地修复问题、安排维修或获得支持，只需从您的设备或我们的支持网站即可。

This article explains Dell’s 17th Generation (17G) transition from Dell‑custom Ethernet network interface cards (NICs) to industry‑standard NICs, detailing how this change aligns with industry practices while preserving Dell validation, life cycle management, and enterprise support, with standardized iDRAC‑based management.

Intel X710 显示交换机连接 ID 和交换机端口连接 ID 为不可用。

This article provides a high‑level guide to downloading vendor‑specific firmware and drivers for common PowerEdge NICs such as NVIDIA, Broadcom, and Intel. These processes complement Dell Update Packages (DUPs) and are used when vendor‑specific firmware or drivers are required beyond Dell’s updates.

Linux-based Dell Update Packages (DUPs) for Intel Network cards on firmware family 24.0.0 may display the message "Requires Power Cycle for activating the updated firmware."

On PowerEdge 17G servers with Intel Ethernet E825 network interface card (NIC), performing simultaneous changes to SR-IOV settings and port configuration in the Host Interface Infrastructure (HII) results in a critical and warning error messages. This issue occurs during configuration changes in the system BIOS.

Warning messages regarding "icen_SetRxQueueFilter" and "Failed to add cloud filter" in ESXi 8 VMware VMkernel log.

Following the initial setup, the Intel Infrastructure Processing Unit (IPU) is unable to ping networks beyond its local network.

If the Intel Infrastructure Processing Unit (IPU) is rebooted through the Infrastructure Management Controller (IMC), the entire server reboots.

在同时更新 BIOS 和 Broadcom 嵌入式网络固件期间，使用 Intel E810 进行 iDRAC 通信时，链路被丢弃且无法恢复。

本文讨论在 QLogic FastLinQ 45XXX 和 41XXX 适配器上配置网络分区 （NPAR） 时的重要注意事项。

When Dell Intel E810-CQDA2 part number 85F8F or DWNRF is used with FR1 transceiver part number PJ62G, it cannot link up. The maximum power consumption of the transceiver Dell Part Number (DPN) PJ62G is 4W, which exceeds the NIC device's power supply limit of 3.5W.

Dell Intel E810-C adapters do not support disabling the Virtual Machine Device Queue (VMDQ) loopback feature using "Intnetcli" tool.

After a cold boot of the server, the Intel IPU E2100-CCQDA2 may present PR8 entries in the Lifecycle log.

安装在 XR4510c 中的英特尔 E823-C 网络接口卡 （NIC） 在热重新启动后可能无法检测到。

iDRAC user interface and LSPCI show multiple PCIe Functions for the Intel Infrastructure Processing Unit (IPU) E2100-CCQDA2.

If a bond is created in Linux using the Intel Infrastructure Processing Unit (IPU) E2100-CCQDA2, the bond does not come online.

Network port enumeration on Windows Server 2022 with Dell network adapters may swap port designations.

An error occurs when attempting to apply default settings to a Dell Intel E810-2C Ethernet Adapter. These adapters are configured with Permit Total Port Shutdown enabled. Both ports have Port Option set to 4x25.

Dell XR4510C customers may report the iDRAC failed path does not fail over to other Lan On Motherboard (LOM) ports as expected.

Exporting a device template from OpenManage Enterprise fails with the message: "An unknown error has occurred. Please try again."

This article provides information about the Intel X550 Option ROM initialization error during POST on the PowerEdge XE7440.

False NIC100 and NIC101 events may be logged in Lifecycle Controller logs with the Intel X710 family of adapters.

更新 Intel 7265 或 8260 无线驱动程序，以解决网络连接问题。

本文提供有关在启用 LLDP 的情况下从 Intel X710 NIC 进行 PXE 引导时出现的问题的信息。

在“初始化固件接口...”期间 SFP+ 端口关闭。并且 SFP+ 端口 LED 指示灯全部熄灭。

客户的 SONiC 4.4.0 交换机上的英特尔 X710 NIC 和 PKR0R 收发器遇到接口抖动问题。

Intel X520/X540 VMware ESXi SR-IOV 配置 max_vfs