Isilon

本文档重点介绍 Dell Technologies 企业和数据中心基础架构产品的最低代码版本、建议代码版本和最新代码版本。戴尔会仔细评估和监控代码部署数据，以确保产品版本符合我们严格的期望，从而为客户提供可靠的产品和解决方案。

本文不再维护。

写入版本为 9.11 的 PowerScale OneFS 的网络文件系统 （NFS） 客户端可能会遇到罕见的写入操作失败，表现为输入或输出错误 （EIO）。

When viewing the Status area of the Cluster Status page in the OneFS web administration interface, one or more nodes might be in an attention state. Nodes in attention state are indicated with a yellow dot in the Status column. It might not always be evident why the nodes are in this state. Viewing the Node Status page by clicking the node number in the ID column does not provide any additional information. Any node that is in an attention state has experienced an event that has not ended. This article explains how to use the OneFS web administration interface or the command line in OneFS to verify a node's attention status.

本文旨在帮助您了解不同的 NDMP 作业类型及其在 PowerScale OneFS 中的运行方式。

本文提供预订远程主动服务 （RPS） 升级时的计划提前期估计。

This article explains how to change Logical Node Number (LNN) from the CLI.

This article describes the procedure for users to get notifications of documents published on any product that has notification abilities.

This KB explains the Isilon Boot Disk, what it does and also explains how different Node models "boot." There is also some brief information about the type of data stored on these special drives (or "partitions").

Isilon OneFS: Event notification: Node Offline - Event ID: 200010001, 300010003, 399990001, 900160001, 910100006, 400150007

Dell PowerScale OneFS remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

如果配置的 MetadataIQ 路径具有 ADS 标记且群集在 9.10.1.3 上，则 ChangelistCreate 作业将失败。

本文介绍如何查找打开戴尔存储和数据保护硬件产品的服务请求或支持案例所需的序列号、产品 ID 或产品序列号标签 （PSNT）。

如何将 PowerScale OneFS 群集置于维护模式，以避免在维护活动期间收到警报或触发呼叫总部服务请求 （SR）。

客户端无法使用 NFSv3 执行文件锁定。客户端收到错误，指示“No locks available”，Isilon 上的 NFS 日志中也会显示以下内容“nfs[2858]”：[nfs]Received failure status 0xc00000cc （STATUS_BAD_NETWORK_NAME） for NLM operation'

第 6 代半机箱（仅填充两个节点）在机箱左侧的托架 1 和 2 中随附节点。空的右侧托架（3 和 4）填充填充面板。如果将节点移至右侧托架，则填充面板无法移至左侧托架，因为它们不适合。

重复数据消除作业失败，并显示错误“Dedupe failing ”[MAJOR] dedupe CreateDedupeRequestForDigest/1846 failed to check index status： Handle must be released and reacquired.” 作业可能会在后续运行中成功。

本文档介绍如何使用 OneFS CLI 通过 FSAnalyze 结果集获取给定目录的文件和目录计数。

/ifs/data/Isilon_Support/是戴尔 PowerScale 群集上的一个目录，用于收集支持和诊断数据，包括遥测报告、日志、脚本和临时备份文件。 随着时间推移，此目录可以累积许多杂项文件和文件夹。

The article provides links to content related to Hadoop on OneFS.

The Simple Network Management Protocol (SNMP) Trap is not set when configuring SNMP alert channels in OneFS WebUI.

如果 A100 节点中的其中一个启动驱动器显示 SMARTFAIL 状态，请勿等待 Smartfail 完成。

The Dell PowerScale OneFS Info Hubs provide links to OneFS documentation.

如何确认群集中安装的 RAM 量。

启用或禁用 SMBv1 的选项是在前面的代码中使用 gconfig 引入的。为了支持旧工作流，它仍然存在于当前代码中。

如何使用 LED 确定加速器节点的运行状况。

Connecting a new unconfigured node to an existing cluster's InfiniBand fabric may cause the SM master to move.

Performance to the Isilon may be degraded or appear temporarily unresponsive after upgrading to OneFS 8.2. One symptom of this is that the network receive queue for port 445 will be non-zero while CPU/disk and other performance metrics do not indicate a problem.

After adding nodes to an Isilon cluster that requires splitting neighborhoods or node pools, clusters with less free capacity can suffer from effects of capacity imbalance.

This article describes how the Smartconnect Service IP Address (SSIP) has been moved from a SYSTEM_ZONE to a DISABLED_ZONE and its impact when connecting to the SSIP