Storage Spaces Direct R640 Ready Node

不确定更新 PowerEdge 系统中特定组件固件的过程？在此特定文章中了解应该怎么做。

本文详细介绍了在 PowerEdge 服务器上可能会出现的电源装置 (PSU) 问题的故障排除步骤。

以下文章是从少数版本的 iDRAC 的关键日志条目“SWC5008无法访问前 LED 面板”恢复 PowerEdge 系统的解决机制。

PowerEdge connected Dell NVMe SSDs with the Limited Retry (LR) bit set may experience an increase in failures due to elevated media and data‑integrity error rates.

Dell PowerEdge Toshiba MG08 and MG09 hard drives may encounter uninterruptible Background Media Scanning (BMS), causing I/O errors, or timeouts.

This article explains Dell guidelines on company administrator assignment.

This article explains how to assign an Initial Company Administrator.

This article explains how to promote Company Administrators.

Dell Samsung PM893 SSDs with Firmware HJ55 or Earlier Experience Premature SMART Failures

获取访问 Dell PowerEdge iDRAC 的帮助，包括默认用户名和密码、重置方法以及远程登录故障处理。

After a system restart, the Integrated Dell Remote Access Controller (iDRAC) may not display the Virtual Disk information intermittently.

CPUs can be perceived to be hot while server is idle.

How to create Cluster Shared Volumes by manually calculating the necessary disk space value.

After an update to 7.00.00.00 or higher, the iDRAC9 web server may become inaccessible where the user has uploaded a custom or CA signed web certificate.

The iDRAC is unable to connect to a Server Message Block (SMB) share when the optional "SMB3 share encryption" is enabled.

BIOS/CPLD or backplane firmware DUP may fail to update when attempted soon after iDRAC restart.

The user reported that the Power Supply Unit (PSU) has encountered issues when inserted into the server. It failed to power on the Dell PowerEdge R640 server, but the indicator on the PSU shows a green LED. Checking the TSR log finds the messages "PSU redundancy lost" or "The system board XXX voltage is out of range."

This how-to explains the commands and shows the results of outputs for the same to retrieve your service tag using a command console. It is displayed as the system serial number.

This article provides information about Dell Boot Optimized Storage Solution (BOSS) PCIe cards. It also provides instructions for installing Windows, Red Hat, SuSE, Ubuntu, and related Linux distributions onto these cards.

本文提供了有关管理安装在基于英特尔的第 14 代和第 15 代 PowerEdge 服务器以及基于 AMD 的第 15 代 PowerEdge 服务器中的 DDR4 RDIMM 或 LRDIMM 上的可纠正错误阈值事件（MEM0802 或 MEM5104）的更新建议。

了解如何在戴尔设备上使用 iDRAC9 和 iDRAC10 创建和导出 SupportAssist 收集。使用此分步指南解决技术问题。

This article explains how to use iDRAC Direct to manage your PowerEdge server.

DSA-2020-147: Dell Server Platform Security Advisory for the 2020.1 Intel Platform Updates (June 2020) - Intel SSD - CVE-2020-0527

Domain Name System (DNS) resolving the local hostname may return the internal IP address of the USB Network Interface Card (NIC) passthrough device enabled by iDRAC Service Module (iSM). This can cause issues with internal network devices configured with 169.254.x.x nonroutable addresses. The metric of the USB NIC device should be manually set to a high number so that internal network devices take precedence.

本文提供了有关如何在 PowerEdge 服务器上禁用 C-State 和 C1E 的信息。

本文提供有关在 OMSA、系统设置页面和 iDRAC 界面中识别硬盘属性的信息。

本文介绍如何在Dell PowerEdge服务器上恢复BIOS默认设置。此过程可能对其它戴尔产品有效。

本文提供了建议的步骤，以帮助对 Dell PowerEdge 服务器上的内存相关事件进行故障处理。

如果 LifeCycle Controller （LCC） 已启用，但在 POST 期间菜单中没有它，则您可能需要导入 iDRAC 许可证才能再次启用它。

A workaround for when the BIOS update fails for the first time on 14G PowerEdge servers.