PowerFlex custom node R6625

戴尔为我们的许多硬件系统提供了客户可更换部件 (CRU) 计划。CRU 计划允许客户更换指定的硬件组件。有关为特定硬件系统指定为 CRU 的硬件组件的列表，请转至戴尔保修和维护页面。

不确定更新 PowerEdge 系统中特定组件固件的过程？在此特定文章中了解应该怎么做。

This article provides links to PowerFlex custom node technical documentation.

删除并重新添加资源组。

14‑gen Ready Nodes with ≥12 DIMMs can reboot, recorded in iDRAC as a BP1 power‑good voltage out‑of‑range error; signal noise on the backplane power cable creates loss alerts, risking data loss.

多个 PowerFlex 机架或设备存储节点报告电池性能下降。 iDRAC 显示错误“NVDIMM 电池未就绪，因为电池未充满电或发生瞬时电池事件”。

The "Software Serial ID" or "SWID" (usually starts wit ELMSIO....) is used to open Service Request for PowerFlex, and to start software renewal process. If the Software Serial ID is not available, you can also create cases using the "System Serial number" (usually starts with "ELMVX....)

The following procedure explains how to manually install an external SDC on a Debian-based server. The steps in the procedure below are relevant for Debian/Ubuntu operating systems, including Proxmox Virtual Environment.

PowerFlex Manager 报告与“STORAGE_POOL_UNBALANCED”、“NOT_ENOUGH_FAULT_UNITS_IN_SP”和“CONFIGURED_SPARE_CAPACITY_SMALLER_THAN_LARGEST_FAULT_UNIT”相关的错误警报。

This article explains how to use iDRAC Direct to manage your PowerEdge server.

本文介绍如何将内部 HTTP 共享用于 4.x PowerFlex Manager 版本认证矩阵 （RCM）、Intelligent Catalog （IC） 和 ISO 上传。

This Article explains the details of an MDM cluster in a PowerFlex solution.

Slow, non‑SSD storage on the cluster VMs leads to etcd latency over one second, triggering repeated pod restarts, node NotReady states and loss of PowerFlex Management Platform (PFMP) UI access.

Offline upgrade of PowerFlex Manager How to manually upgrade PowerFlex Manager without Secure Remote Services.

当生成警报的服务或 MDM 不再处于活动状态时，警报仍停留在 PowerFlex Manager UI 中。这会导致 UI 无法清除它们。

Details the graceful reboot of PowerFlex Management Platform (PFMP) VMs for version 4.X, including labeling, draining, and rebooting MVMs while keeping two nodes active and checking PostgreSQL health. In the scope of this procedure, MVM1 is the postgres Leader. It is drained and rebooted last.

PowerEdge 服务器中使用的 Samsung PM9D3a 和 PM9D5a NVMe SSD 缺乏对安全协议和数据模型 （SPDM） 的支持，导致 SPDM 相关功能失败。

网关或演示服务器可能会出现连接问题，并显示“端口超出范围”或“正在尝试重新连接”。

Domain Name System (DNS) resolving the local hostname may return the internal IP address of the USB Network Interface Card (NIC) passthrough device enabled by iDRAC Service Module (iSM). This can cause issues with internal network devices configured with 169.254.x.x nonroutable addresses. The metric of the USB NIC device should be manually set to a high number so that internal network devices take precedence.

本文提供了有关如何在 PowerEdge 服务器上禁用 C-State 和 C1E 的信息。

本文提供有关在 OMSA、系统设置页面和 iDRAC 界面中识别硬盘属性的信息。

本文介绍如何在Dell PowerEdge服务器上恢复BIOS默认设置。此过程可能对其它戴尔产品有效。

This article is about an error that a user may see when adding a "DAX" device into the acceleration Pool.

本文提供了建议的步骤，以帮助对 Dell PowerEdge 服务器上的内存相关事件进行故障处理。

如果 LifeCycle Controller （LCC） 已启用，但在 POST 期间菜单中没有它，则您可能需要导入 iDRAC 许可证才能再次启用它。

本操作方法解释了这些命令，并显示了相同的输出结果，以便使用命令控制台检索您的服务编号。 它显示为系统序列号。

本文介绍重置 PowerFlex Manager 平台 （PFMP） 管理员密码或 PFMP 中任何帐户的步骤。

本文详细介绍了导致硬盘故障的各种原因。

This article explains how to update the BIOS version of a Dell PowerEdge Server using EFI file. The update can be done directly from the Unified Extensible Firmware Interface (UEFI) interface.

The Dell Nautilus Firmware Update Utility is flexible and simple to use as it contains all the latest, relevant firmware updates for hard drives in your Dell server.