PowerFlex Software

本文档重点介绍 Dell Technologies 企业和数据中心基础架构产品的最低代码版本、建议代码版本和最新代码版本。Dell Technologies 会仔细评估和监控代码部署数据，以确保产品版本符合我们严格的期望，为客户提供可靠的产品和解决方案。

本文档重点介绍 Dell Technologies 企业和数据中心基础架构产品的最低代码版本、建议代码版本和最新代码版本。Dell Technologies 会仔细评估和监控代码部署数据，以确保产品版本符合我们严格的期望，为客户提供可靠的产品和解决方案。

此问题发生在 PowerFlex Manager 平台 （PFMP） 群集部署期间，其中客户安全标准不允许将默认 UMASK 值更改为 0022，并将其更改为其他值。CMO 需要 UMASK 022 来设置 helm 图表。

在生成 getinfo 日志时，LIA 调用了 OOM killer （Out Of Memory Killer），导致 SDS 服务崩溃。

Resource Group (RG) operations will complete and cause DU when an MDM cluster has fewer virtual IPs than MDM DATA IPs.

Resource Group (RG) operations will complete and cause DU when the system has fewer Standby Manager or Tie-Breaker MDMs than expected.

Resource Group (RG) operations will complete and cause DU when the system has fewer Standby Manager or Tie-Breaker MDMs than expected.

本文介绍将 MDM 群集更改为 1 节点、3 节点或 5 节点群集的命令switch_cluster_mode

在 PowerFlex Manager 5.1.0.0 中，PDF 合规性报告生成失败，并出现超时和 ArrayIndexOutOfBoundsException 错误。要恢复 PDF 功能，必须升级 PFMP。

本文介绍 PowerFlex 产品限制，以及每个产品限制的组件的系统要求 消费模式。下表汇总了 支持的功能和系统限制： 产品限制指定了关键系统参数的最大值（在某些情况下为最小值）。

本文列出了用于了解 PFMP IP 地址和 FQDN 的 mvm 命令行

Dell PowerFlex 设备和 PowerFlex 机架迁移到 PowerFlex 4.x指南涵盖从 PowerFlex Manager 4.5.x 迁移到 PowerFlex Manager 4.x。

本文列出了 PowerFlex 5.1 兼容性，显示了经过验证的 VMware、Nutanix、Microsoft Hyper-V、Citrix 和 Linux 发行版和版本，以及支持的存储节点。

本文介绍了使用戴尔支持页面打开服务请求 （SR） 的过程。 快速获取有关您的戴尔设备的帮助。不再需要等待。不再有技术难题。 戴尔让您可以轻松地修复问题、安排维修或获得支持，只需从您的设备或我们的支持网站即可。

This article explains how to reboot different node types for PowerFlex systems.

由于端口 UDP 1194 被阻止，运行命令 svm 状态连接将两个 CloudLink 节点显示为不可访问。

Use this procedure to verify and upgrade the CPLD firmware version on PowerFlex nodes. PowerFlex Manager does not verify or upgrade CPLD.

Dell PM1735a Non-Volatile Memory Express (NVMe) drive failing in PowerEdge servers.

This article explains the meaning of Dial Home Symptom code SIO02.04.0000009 and how to troubleshoot it.

PowerFlex— 执行网络维护后，某些 Storage Data Server （SDS） 的写入性能会下降。

This article details step-by-step procedures to enable suppression of ESXi alarms on TPM when Secure Boot is not enabled on ESXi.

This article shows the PowerFlex release matrix, and guidance on how to correlate the various packages.

PowerFlex Manager: RKE2 upgrade fails repeatedly due to "405 Not Allowed" error while creating the upgrade payload During the PowerFlex Management Platform (PFMP) upgrade, the process fails repeatedly, looping at the point of creating the upgrade payload folder in the http-share. The failure occurs with an HTTP 405 Not Allowed error.

This article describes a cause for hostd service on ESXi to be non-responsive, and cause the server to become unresponsive to management operations from vCenter. The particular scenarios where this happens is when NFC operations such as backup or replication jobs are performed on disks with an IO filter attached.

问题描述 在数据存储区内遇到高延迟后，vSphere ESXi 主机挂起并随机变得无法访问。

Dial home alert is logged when there is a disconnection between SDC multiple SDS.

During upgrade of PowerFlex using Installation Manager, unable to upgrade one SDS and unable to mark upgrade complete.

There are two options to configure events and alerts: ● Connect directly ● Connect using secure connect gateway ● If you connect directly, only the call home option is available ● If you connect through secure connect gateway, all options through secure connect gateway are enabled

This article explains how to perform the WSFC conversion at a high-level. It also covers converting an Oracle RAC environment from RDMs to shared VMDKs on NVMe/TCP, even though Oracle RAC does not require SCSI3‑PR. Oracle RAC can run on an SDC‑based VMFS datastore, but because PowerFlex does not support Clustered VMDK on SDC‑based VMFS, SCSI3‑PR‑dependent applications cannot use that configuration. Oracle RAC explanations are also high-level.

PowerFlex Replication Consistency Group (RCG) LAG time continues to increase after peering is disconnected and then restored between the source and destination sites.