Solutions Enabler

戴尔为我们的许多硬件系统提供了客户可更换部件 (CRU) 计划。CRU 计划允许客户更换指定的硬件组件。有关为特定硬件系统指定为 CRU 的硬件组件的列表，请转至戴尔保修和维护页面。

Unisphere 和 Solutions Enabler 9.x 软件无法管理 V4 阵列型号。软件的 9.x 版本无法检测到 PowerMax 型号 2500 和型号 8500 阵列。

Dell PowerMaxOS, Dell PowerMax EEM, Dell Unisphere for PowerMax, Dell Unisphere for PowerMax Virtual Appliance, Dell Solutions Enabler and Dell Solutions Enabler Virtual Appliance remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

Isilon/PowerScale 节点死机

升级 Solutions Enabler 和 Unisphere for PowerMax 的详细过程。

Solutions Enabler （SE） 命令失败，并显示错误“此微码或 SYMAPI 版本不支持请求的功能”。在阵列中的 PowerMaxOS 升级到 v10.2 或 v10.3 后，会发生这种情况。

从 SE/CLI/Unisphere 查询终止显示正在建立的快照。

This article describes the procedure for users to get notifications of documents published on any product that has notification abilities.

本文介绍如何查找打开戴尔存储和数据保护硬件产品的服务请求或支持案例所需的序列号、产品 ID 或产品序列号标签 （PSNT）。

有效已用容量是衡量利用率的最佳指标。

本文提供了删除混合了“synchronized”和“invalid”对状态的 SRDF 对的详细步骤。

观察到 SK Hynix PE8010 和 PE8030 NVMe M.2 驱动器报告 PDR3 事件代码和故障状态。

Symrecover 失败并显示 ERROR：黄金副本克隆包含克隆状态无效的设备。

如何使用 Solutions Enabler 使控制器联机？

Solutions Enabler 10.x symclone action using logical device name fails with : The requested feature is not supported for this microcode or SYMAPI version

Recommendations for carrying out Proactive Healthchecks on PowerMax Array

SnapVX Snapshot linked device showing larger Exclusive Effective than expected

How to set SRDF or Metro preference for Witness protected groups.

Dell Solutions Enabler assigns user or group to authorization role StorageAdmin for a Storage Group fails with: One or more arguments are invalid.

Unisphere for PowerMax v10 的全新安装无法在 Linux SUSE 15 SP3 独立服务器上正常运行。

VDM cannot load after a DataMover (DM) panic due to blocked threads, issue is when eNAS is running Version 8.1.15.401 and NFSv4 mounted filesystem.

由于在 VMAX AFA 250F/PowerMax 2000 系统上执行内存 DIMM 故障修复活动时发现的一个问题，建议在要完成的故障修复活动之前安装 SymmWin 增强修复 598181，以避免潜在的影响情况。

symsnapvx terminate with -all_snapshot_names and -force options remove every snapshot for a device, however it was failed with error. An internal Snap, Clone, or Snapvx error has occurred. See the symapi log file and contact EMC.

如何为 IBM i 主机系统执行存储性能分析并调整 ASP 容量和单个磁盘的规模。

本知识库文章讨论如何通过 Solutions Enabler 和 Unisphere for PowerMax 创建掩蔽视图。

The Dell VMAX and PowerMax enterprise storage platform families support storage-based Non-Disruptive Migrations (NDM) to migrate business-critical host systems to new storage arrays without application downtime. With the release of the PowerMaxOS 5978.444.444 code family, NDM support is added for the IBMi host platform. NOTE 1: For IBMi systems that also use Dell's native STM software toolkit (SRDF/TimeFinder Manager for IBMi), there are some additional considerations when the (optional) final step in the NDM process is done for a device-identity reset (unspoofing) of the migrated devices. Read the instructions provided below, prior to performing the identity reset! NOTE 2: The device identity reset, also mentioned as an "unspoof" operation, has implications for the next initial program load (IPL) phase after the unspoof. Read further details below.

Symmetrix VMAX Diagnostic and Realtime performance collection not happening after changing the default STP location.

Authentication issues will occur if symauth is enabled and daemons are restarted, before user and group role mappings are defined.

The user is unable to view the CGs under the Local Consistency Group column after selecting device pairs in SRA.

How to allocate Storage to a host using SYMCLI.