Version Mismatch between the management server and directors causes all storage volumes to report their 'Operational Status' and 'Health State' as 'unknown'.

已更新: 五月 10, 2026 ID: 000188498

VPLEX: On the Storage View "Add/Remove Initiators" window, clicking on "show used initiators" checkbox does nothing

On element manager VPLEX HTML5 GUI, using the Storage View "Add/Remove Initiators" windows, the checkbox "show used initiators" does not work properly as it does not toggle visibility of initiators already bound to other storage views.

已更新: 五月 08, 2026 ID: 000184016

VPLEX: After Password Change of Active Directory Bind User for LDAPS the reconfiguration fails

After Password Change of Active Directory Bind User for LDAPS on the active directory server the reconfiguration on VPlex clusters fails. AD user cannot authenticated on VPlex anymore.

已更新: 五月 08, 2026 ID: 000183742

Cisco MDS 交换机：主机在区域激活时丢失了 VPLEX 前端 (FE) 端口的路径

在区域激活时，所有分区到 VPLEX 前端端口的 HBA 都将注销并丢失路径。ESX 主机可能会挂起，并且需要重新启动才能恢复。[Scott — 这是否仅影响 ESX 主机？摘要内容为“分区到 VPLEX 的所有 HBA”，我们是要将此限制为仅适用于 ESX 主机，还是重述为“主机可能会挂起，并且需要重新启动才能恢复”？]

已更新: 五月 07, 2026 ID: 000181952

存储和数据保护技术白皮书与视频

本知识库文章是 Dell Technologies 制作的技术文档和视频的列表。

已更新: 五月 05, 2026 ID: 000182342

VPLEX: Management Server is Not Accessible over SSH or Browser

This article talks to the issue where the SSH access to the VPLEX management server fails. This article provides the workaround steps to resolve this issue.

已更新: 五月 05, 2026 ID: 000173992

VPLEX: Unable to Remove Decommissioned Storage Array from VPLEX UI or CLI

This article discusses stale, or phantom arrays present after an array is removed from the VPLEX and the steps to take to remove the phantom array.

已更新: 五月 05, 2026 ID: 000173891

Dell EMC VPLEX：DU 在 BE 阵列上将 LUN 类型从精简更改为密集

本文讨论在 BE 阵列上将 LUN 类型更改为密集（之前在 VPlex 上配置为精简）时如何缓解 DU。

已更新: 五月 05, 2026 ID: 000172418

VPLEX: GUI and CLI not showing new free space in expanded Storage Pool.

VPlex 5.4 using VIAS to integrate VNX storage is show incorrect storage pool size after a pool expansion was done on the connected VNX array. New free space added to the storage pool on the array is not reflected in the VPlex CLI or GUI storage-pools context.

已更新: 五月 05, 2026 ID: 000171054

VPLEX: 0x8a2d30aa - Dial-home - An array returned Unit Attention 6/38/07h THIN_PROVISIONING_SOFT_THRESHOLD_REACHED.

This article provides a description of the thin provisioning soft threshold dial-home and recommendations to resolve the warning.

已更新: 五月 05, 2026 ID: 000170715

VPLEX: Unable to expand virtual-volume protected by RecoverPoint

This article talks about expanding a virtual-volume when protected by RecoverPoint.

已更新: 五月 05, 2026 ID: 000170477

VPLEX: Automated Metadata Backup Fails due to "the Active Metadata Device is Not Healthy"

This article talks to the issue where the Automated metadata backup fails due to "The active metadata device is not healthy." This article provides the remediation steps to resolve this error.

已更新: 五月 05, 2026 ID: 000167982

VPLEX: Renaming backups is not supported on VPlex and may cause backup rotation fail.

This article describes the backups rotation and the meta data backups renaming. <[HK] - Give detailed description/summary>

已更新: 五月 05, 2026 ID: 000167857

VPLEX: Distributed Device experiencing performance issues

VPlex Distributed Device experiencing performance issues

已更新: 五月 04, 2026 ID: 000167575

VPLEX: Directors ASSERT due to LUN swapping duplicate LUN ID on SYMMETRIX

This article talks to an issue on the VPLEX when a device is removed from a SYMM array and a duplicate ID and LUN ID may be seen on the VPLEX causing it to ASSERT,

已更新: 五月 04, 2026 ID: 000167522

VPLEX: LUN Z explained

This article explains what a LUNZ device is, why a host would see one, and how to remove it.

已更新: 五月 04, 2026 ID: 000167140

VPLEX: How to Set Rebuild Transfer Size

This article describes how to increase or decrease the rebuild transfer rate, and the effects of doing this.

已更新: 五月 04, 2026 ID: 000158424

VPLEX: How to create a virtual volume

This KB article outlines the steps needed to create a virtual volume.

已更新: 五月 04, 2026 ID: 000158420

VPLEX: How to Optimize I/O Forward Options for a Successful VPLEX Director NDU

This article explains how to manage the I/O forwarding phase during a VPLEX Director NDU by using the --io-fwd-ask-for-confirmation and --io-fwd-timeout options. This allows users to configure the shortest timeout that still meets user requirements.

已更新: 五月 04, 2026 ID: 000158374

VPLEX: How to move one leg of a logging volume

This article explains how to move one leg of logging volume from one array to another. This is done by detaching one of the existing legs and attaching the new leg from the new location.

已更新: 五月 04, 2026 ID: 000158372

VPLEX: How to Change IP addresses

This article details the steps to generate a SolVe Desktop procedure to Change IP addresses of a VPlex cluster.

已更新: 五月 04, 2026 ID: 000158332

VPLEX: How to view the CPU core usage on a VPLEX director

This KB article shows how to view the current core CPU usage on a specific VPLEX director.

已更新: 五月 04, 2026 ID: 000158229

DSA-2026-124: Security Update for Dell VPlex Multiple Third-Party Component Vulnerabilities

Dell VPlex remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

已更新: 四月 20, 2026 ID: 000443350

戴尔产品：如何为保修期内的戴尔产品在线创建支持请求

本文介绍了使用戴尔支持页面打开服务请求（SR）的过程。为您的戴尔设备快速获取帮助。无需再等待等待。不再有技术难题。戴尔可让您通过设备或我们的支持网站轻松解决问题、安排维修或获取支持。

已更新: 四月 19, 2026 ID: 000132371

Windows 2016 上的 PowerPath for Windows 6.1 报告驱动程序版本低于作系统版本

在 Windows Server 2016 上安装 PowerPath for Windows 版本 6.1 时，验证警报会指示许多驱动程序的日期早于作系统，因为 PowerPath 版本早于作系统。

已更新: 四月 18, 2026 ID: 000062991

支援資源

VPLEX VS1

快速連結