Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the thumb screw that secures the side cover to the system.
Slide and lift the side cover off the system.
Hard Drive Assembly 2.5 inch
Identify the hard drive assembly highlighted in blue.
Press the release tabs on the hard drive assembly and slide it towards the front of the system.
Lift the hard drive assembly from the system.
Wireless Module (WLAN)
Identify the wireless module (WLAN) highlighted in blue.
Remove the screw that secures the bracket to the system board.
Slide and lift the bracket from the WLAN card.
Disconnect the antenna cables from the WLAN card.
Slide and lift the WLAN card from its connector on the system board.
Install
Wireless Module (WLAN)
Identify the wireless module (WLAN) location highlighted in blue.
Slide and install the WLAN card to its connector on the system board.
Connect the black cable to the auxiliary (black triangle).
Connect the white cable to the main (white triangle).
Place and slide the bracket on the WLAN card.
Install the screw that secures the bracket to the system board.
Hard Drive Assembly 2.5 inch
Identify the hard drive assembly location highlighted in blue.
Place the hard drive assembly into the slot on the system.
Slide the hard drive assembly towards the connector on the system board until the release tabs click into place.
Side Cover
Identify the side cover location highlighted in blue.
Place and slide the side cover towards the back of the system.
Tighten the thumb screw that secure the side cover to the system.