This 3D experience gives you the step by step process of replacing the Solid State Drive (SSD) and a Latitude7520. The procedure will also include removing the Base Cover, SSD SSD and reinstalling them.
Removal
Base Cover
Identify the base cover highlighted in blue.
Loosen the captive screws that secure the base cover.
Pry the base cover near the hinges to release it from the system. Do not slide it along the back.
Remove the base cover by loosening the sides and front.
Solid State Drive (SSD)
Install
Solid State Drive (SSD)
Base Cover
Identify the base cover location highlighted in blue.
Align the base cover tabs to the slots, press the cover until it clicks into place.
Tighten the captive screws that secure the base cover to the system.