Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the thumbscrews that secure the side cover to the system.
Slide and lift the side cover away from the system.
Front bezel
Identify the front bezel highlighted in blue.
Gently pry and release the front bezel tabs sequentially from the top.
Rotate the front bezel outward from the chassis and remove the front bezel.
Hard Drive 3.5 inch
Identify the hard drive assembly highlighted in blue.
Disconnect the data and power cables from the hard drive.
Remove the screws that secure the hard drive to the system.
Remove the hard drive away from the system.
Front Input/Output Bracket
Identify the front input/output bracket highlighted in blue.
Remove the screws that secure the front input/output bracket to the system.
Remove the front input/output bracket from the system.
Power Button
Identify the power button highlighted in blue.
Disconnect the power button cable from the connector on the system board.
Press the release tabs on the power button head and slide the power button cable out from the front side chassis of the system.
Remove the power button along with its cable from the front side of the system.
Install
Power Button
Identify the power button location highlighted in blue.
Insert the power button cable into the slot on the front side of the system.
Press the power button head until it clicks into place on the system.
Connect the power button cable to the connector on the system board.
Front Input/Output Bracket
Identify the front input/output bracket location highlighted in blue.
Place the front input/output bracket on the system.
Install the screws that secure the front input/output bracket to the system.
Hard Drive 3.5 inch
Identify the hard drive assembly location highlighted in blue.
Place the hard drive into the system.
Install the screws that secure the hard drive to the system.
Connect the data and power cables to the hard drive.
Front bezel
Identify the front bezel location highlighted in blue.
Align the front cover tabs with the slots on the chassis.
Rotate the front cover towards the chassis and snap it into place.
Side Cover
Identify the side cover location highlighted in blue.
Align the tabs on the side cover with the slots and place the side cover on the system.
Tighten the thumbscrews that secure the side cover to the system.