Removal
Side Cover
Identify the side cover highlighted in blue.
Slide the release latch to release the side cover from the computer.
Slide the side cover back and lift it off the chassis.
Hard Drive Assembly (2.5)
Identify the hard drive assembly highlighted in blue.
Disconnect the data and power cables from the hard drive.
Press the tab and lift the hard drive assembly to release it from the chassis.
2.5 Hard Drive
Position the part to enable AR.
Identify the hard drive highlighted in blue.
Pull one side of the hard drive bracket to release the pins from the drive slots.
Slide and lift the hard drive out of the bracket.
Install
2.5 Hard Drive
Position the part to enable AR.
Identify the hard drive location highlighted in blue.
Align and place the hard drive to the side of the hard drive bracket.
Pull the other end of the hard drive bracket to insert the pins into the hard drive slot.
Hard Drive Assembly (2.5)
Identify the hard drive assembly location highlighted in blue.
Align the tabs on the hard drive assembly with the slots on the chassis, then snap it onto the disk drive assembly.
Connect the data and power cables to the connectors on the hard drive.
Side Cover
Identify the side cover location highlighted in blue.
Align the tabs on the side cover with the slots on the chassis.
Slide the side cover forward until you hear the latch click.