Removal
Base Cover
Identify the base cover highlighted in blue.
Loosen the captive screws on the base cover.
Remove the screws that secure the base cover.
Carefully pry the base cover from the gaps on the sides to the front.
Slide forward and lift the base cover off the system.
Battery Cable
Identify the battery cable highlighted in blue
Using the tab, disconnect the battery cable from the system board.
Press and hold the power button for 15 seconds to remove residual static electricity.
Memory Modules
Identify the memory module highlighted in blue.
Using your fingertips, carefully spread apart the securing clips on each end until the memory module pops up.
Hold the edges and carefully lift the memory module up from connector on the system board.
Install
Memory Modules
Identify the memory module location highlighted in blue.
Align the notch on the memory module with the tab on the slot and slide the memory into the slot at an angle.
Press the memory module down until it clicks into place.
Battery Cable
Identify the battery cable highlighted in blue.
Connect the battery cable to the system board and adhere the cable.
Base Cover
Identify the base cover location highlighted in blue
Slide the base cover into place and press the edges until it clicks into place.
Install the screws that secure the base cover.
Tighten the captive screws that secure the base cover.