Removal
Base Cover
Identify the base cover highlighted in blue.
Loosen the captive screws that secure the base cover.
Pry the base cover near the hinges to release it from the system.
Remove the base cover by loosening the sides and front.
SSD (Solid State Drive) 2230
Identify the solid state drive (SSD) highlighted in blue.
Remove the screw(s) that secures the SSD to the SSD holder.
Slide to remove the SSD from the system. The blue holder is loose and may come out upon removal.
Install
SSD (Solid State Drive) 2230
Identify the solid state drive (SSD) location highlighted in blue.
Align and slide the SSD into the slot on the system board. Install the blue holder if needed.
Install the screw that secures the SSD to the SSD holder. Ensure the blue holder is in place before securing.
Base Cover
Identify the base cover location highlighted in blue.
Align the base cover tabs to the slots, press the cover until it clicks into place.
Tighten the captive screws that secure the base cover to the system.