Removal
Front Bezel
Identify the front bezel highlighted in blue
Unlock the front bezel by using the key.
Press the release button, and pull the left end of the front bezel.
Unhook the right end, and remove the front bezel.
Drive Carrier
Select the drive carrier you want to replace
Press the release button to open the release handle.
Holding the handle, slide the drive carrier out of the drive slot.
Drive 2.5
Identify the cooling fan highlighted in blue.
Open the cable retention plastic clip and unroute the backplane cable.
Disconnect the cooling fan cable connected to the system board connector.
Unroute the Cooling fan cable
Lift the fan out holding the blue touch point.
Install
Drive 2.5
Identify the cooling shroud location highlighted in blue
Align the slot on the air shroud with the standoff on the chassis.
Lower the air shroud into the system until it is firmly seated.
Drive Carrier
Confirm the drive carrier you want to replace
Press the release button on the front of the drive carrier to open the release handle.
Insert the drive carrier into the slot and slide until it connects with the backplane.
Close the drive carrier release handle to lock the drive in place.
Front Bezel
Identify the front bezel location highlighted in blue
Hook the right end of the front bezel onto the system.
Fit the free end of the front bezel onto the system.
Lock the front bezel by using the key.