Removal
Expansion card riser 1
Identify the riser highlighted in blue.
Using a phillips #1 screwdriver, remove the screws that secure the expansion card riser 1.
Holding the handle, lift the expansion card riser from the riser connector on the system board.
System battery
Identify the system battery highlighted in blue.
Push the battery holder clip away from the battery.
Pull the battery out of the battery holder.
Install
System battery
Identify the system battery location highlighted in blue.
Push the battery holder clip away from the battery.
Insert the battery in the battery holder until the battery holder clip snaps into place.
Expansion card riser 1
Identify the riser location highlighted in blue.
Lower the riser firmly until the riser card is fully seated in the slot.
Using a phillips #1 screwdriver, install the screws that secure the expansion card riser 1 on to the system board.