Removal
Air Shroud
Identify the air shroud highlighted in blue.
Press the blue clip and lift the air shroud.
Disengage the air shroud hook from the slot on the chassis and remove the air shroud.
M.2 riser
Identify the M.2 riser highlighted in blue.
Using a phillips #2 screwdriver, remove the screw that secures the riser to the chassis.
Holding the blue tag, lift the riser to disengage from the connector on the system board.
M.2 SSD module
Position the M.2 riser assembly as shown.
Identify the M.2 SSD module highlighted in blue.
Using a phillips #1 screwdriver, remove the screw that secures the M.2 SSD module to the M.2 riser.
Pull the M.2 SSD module to disconnect from the connector on the M.2 riser.
Install
M.2 SSD module
Position the M.2 riser assembly as shown.
Identify the M.2 SSD module location highlighted in blue.
Align and insert the M.2 SSD module firmly until it is fully seated in the connector on the M.2 riser.
Using a phillips #1 screwdriver, install the M.2 SSD module on the M.2 riser with the screw.
M.2 riser
Identify the M.2 riser location highlighted in blue.
Align the M.2 riser with the stand off on the system board and insert it firmly until the riser is fully seated in the slot.
Using a phillips #2 screwdriver, install the screw that secures the riser to the chassis.
Air Shroud
Identify the air shroud location highlighted in blue.
Align the slot on the air shroud with the standoff on the system.
Lower the air shroud until the blue clip locks in place.