How to replace the Solid State Drive (SSD) on a Inspiron 3670

This 3D experience gives you the step by step process of replacing the Solid State Drive (SSD) and a Inspiron 3670. The procedure will also include removing the Base Cover, SSD SSD and reinstalling them.

Removal

Base Cover

1. Identify the base cover highlighted in blue.
2. Remove the screws that secure the cover to the system.
3. Slide the cover toward the back of the system and lift the cover to remove.
4. Press and hold the power button for five seconds to ground the system board.

Solid State Drive (SSD)

1. Identify the solid state drive (SSD) highlighted in blue.
2. Remove the screw that secures the SSD to the system board.
3. Slide out the SSD from the connector on the system board.

Install

Solid State Drive (SSD)

1. Identify the solid state drive (SSD) location highlighted in blue.
2. Align and insert the SSD to its connector.
3. Install the screw that secures the SSD to the system board.

Base Cover

1. Identify the base cover location highlighted in blue.
2. Place the cover on the system, align the clips and slide the cover until it clicks into place.
3. Install the screws to secure the cover to the system.