Removal
System Cover
Identify the system cover highlighted in blue.
Using a flat head or a Phillips screwdriver, rotate the lock counter clockwise.
Lift the latch till the system cover slides back.
Hold the cover on both sides, and lift the cover away from the system.
Airshroud
Expansion Card
Select the expansion card you want to replace
Loosen the captive screws on the riser.
Press the latch on the riser and lift the riser from the riser connector on the system board.
Position the part to enable AR
Pull the black card holder before removing the card from the riser.
Pull and lift the expansion card retention latch lock to open.
Hold the expansion card by the edges. and pull the card until the card edge connector disengages from the expansion card connector on the riser.
Install
Expansion Card
Identify the expansion card location highlighted in blue
Position the part to enable AR
Insert the card edge connector firmly into the expansion card connector until the card is fully seated.
Close the expansion card retention latch.
Push the black card holder to hold the card in the riser.
Lower the riser into place and press the touch points until the expansion card riser connector is fully seated on the system board connector.
Tighten the captive screws on the riser.
Airshroud
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the guide slots on the system.
Push the system cover latch down.
Using a flat head or Phillips screwdriver, rotate the lock clockwise.