Removal
Base Cover
Align the system with the outline to enable the AR lock.
Identify the base cover highlighted in blue.
Slide the blue tab to release the base cover from the system.
Slide the cover toward the back and lift to remove from the system.
Front Bezel
Identify the front bezel highlighted in blue.
Lift the tabs to release the bezel from the system.
Slightly lift the front of the system to release the bezel from system.
Front Panel
Identify the front panel highlighted in blue.
Lift the front panel up to open.
SSD
Identify the solid state drive (SSD) highlighted in blue.
Remove the screw that secures the SSD.
Holding the sides of the module, slightly lift and pull out the SSD from its connector.
Install
SSD
Identify the solid state drive (SSD) location highlighted in blue.
Align and insert the SSD to its connector.
Install the screw to secure the SSD to the system board.
Front Panel
Identify the front panel highlighted in blue.
Close the front panel door. Push down until it clicks into place.
Front Bezel
Identify the front bezel location highlighted in blue
Align the tab holders on the system and push the bezel until the tabs click into place.
Base Cover
Identify the base cover location highlighted in blue.
Install the cover on the system and slide it until it clicks into place.
Slide the blue tab to lock the cover to the system.