Removal
System Cover
Identify the system cover highlighted in blue.
Using a flat head or a Phillips screwdriver, rotate the lock counter clockwise.
Lift the latch till the system cover slides back.
Hold the cover on both sides, and lift the cover away from the system.
Cooling fan assembly
Identify the Cooling Fan Assembly highlighted in blue.
Lift the blue release levers to unlock the cooling fan cage assembly from the system.
Hold the release levers, and lift the cooling fan cage assembly away from the system.
Intrusion switch
Identify the intrusion switch module highlighted in blue.
Disconnect the intrusion switch cable from the connector on the rear I/O board.
loosen the screw on the intrusion switch module.
Slide the intrusion switch module out of the slot on the system.
Install
Intrusion switch
Identify the intrusion switch module highlighted in blue.
Align the guides on the intrusion switch module with the standoffs on the system.
Slide the intrusion switch module into the slot in the system until firmly seated.
tighten the screw on the intrusion switch module.
Connect switch cable to the connector on the system board.
Cooling fan assembly
Identify the Cooling Fan Assembly location highlighted in blue.
Align the guide rails on the cooling fan cage assembly with the standoffs on the system.
Lower the cooling fan cage assembly into the system until the cooling fan cage connectors engage with the connectors on the system board.
Press the release levers to lock the cooling fan cage assembly into the system.
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the guide slots on the system.
Push the system cover latch down.
Using a flat head or Phillips screwdriver, rotate the lock clockwise.