Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the thumbscrews that secure the side cover to the system.
Slide and lift the side cover away from the system.
Speaker
Identify the speaker highlighted in blue.
Disconnect the speaker cable from the connector on the system board.
Unroute the speaker cable from the routing guides on the system.
Press the tab, lift and slide the speaker along with the cable from the slot on the chassis.
Install
Speaker
Identify the speaker location highlighted in blue.
Press the tab on the speaker and slide it into the chassis slot until it snaps into place.
Route the speaker cable through the routing guide on the system.
Connect the speaker cable to the connector on the system board.
Side Cover
Identify the side cover location highlighted in blue.
Align the tabs on the side cover with the slots and place the side cover on the system.
Tighten the thumbscrews that secure the side cover to the system.