Inspiron 5675 Service Manual

Procedure

1. Align the graphics card with the slot on the chassis.
2. Align and place the graphics card into the slot on system board and press down firmly until the graphics card snaps into place.
3. Replace the two screws (6-32UNCx3.6) that secure the graphics card to the chassis.
4. Connect the graphics-card cable to the graphics card.
5. Align the tab on the graphics-card bracket to the slot on the chassis.
6. Align the screw holes on the graphics-card bracket to the screw holes on the chassis and replace the two screws (6-32UNCx3.6) that secures the graphics-card bracket to the chassis.
7. Place the computer in an upright position.