Inspiron 5675 Service Manual

Procedure

1. Align the screw holes on the processor fan with the screw holes on the heat sink.
2. Replace the four screws (M3x7.26) that secure the processor fan to the heat sink.
3. Align the processor fan and heat-sink assembly to the slot on the processor.
4. Align the slots on the release-lever with the securing tabs on both sides of the processor.
5. Pivot the release-lever backwards and secure processor fan and heat-sink assembly on the processor.
6. Connect the processor-fan cable to the system board.
7. Place the computer in an upright position.