Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell Chassis Management Controller Version 3.10 for PowerEdge VRTX RACADM CLI Guide

PDF

getflexaddr

Table 1. Details of getflexaddr. The following table provides the details of attribute:

Description

Enabled or disabled status is displayed for the entire chassis and fabric ID decoder. Use the command with -i option to display the MACs/WWN on a per-slot-basis 

The decoder values in the Type column indicate the protocols of the network cards:

  • 0— Unsupported

  • 1— ISCSI

  • 2— FCoE-FIP

  • 3— iSCSI/FCoE-FIP

To use this subcommand, you must have CMC Login User privilege.

  • NOTE: If FlexAddress is not activated on the chassis, the command displays server-assigned MAC/WWN addresses. If the slot is empty, the command leaves the server-assigned MAC/WWN addresses blank. If an external console controls the MAC/WWN addresses, the command displays an externally managed message.

Synopsis 

racadm getflexaddr [-i <
                                                slotNum>]

Input

-i < slotNum > — Specifies the slot information to be displayed. < slotNum > must be from 1 to 4.

Table 2. Example .

Displays the current FlexAddress settings for all the slots and fabrics.

racadm getflexaddr 

<
                                                Slot#> 
                                             
<
                                                Status>
                                             
<
                                                Server Presence>
                                             
1
 
Enabled
 
Present
 
2
 
Enabled
 
Present
 
3
 
Enabled
 
Not Present
 
4
 
Enabled
 
Not Present
 
<
                                                Fabric>
                                             
<
                                                Type>
                                             
<
                                                Status>
                                             
A
 
Gigabit Ethernet 
Enabled
 
B
 
None
 
Enabled
 
C
 
None
 
Enabled
Table 3. FlexAddress setting .

Displays the current FlexAddress setting for slot 4

racadm getflexaddr -i 4

Slot-4 server presence = Present

Slot-4 flexaddress enabled = 1 

<
                                             Name>
                                          
<
                                             Type>
                                          
<
                                             Server-Assigned>
                                          
<
                                             Chassis-Assigned>
                                          
slot4-idrac 
Controller 
18:A9:9B:FD:C7:57
 
 F8:DB:88:3D:9F:A7(active) 
slot4-A
 
10 GbE KR
 
00:90:FA:51:36:54
 
 F8:DB:88:3D:9F:A8(active)
  
10 GbE KR/3
 
00:90:FA:51:36:55 
F8:DB:88:3D:9F:AA(active)
  
FCoE-WWN
 
10:00:00:90:FA:51:36:55 
20:01:F8:DB:88:3D:9F:AA(active)
  
10 GbE KR/3
 
00:90:FA:51:36:56
 
F8:DB:88:3D:A2:78(active)
  • NOTE: 10 GbE KR/3— The value 3 indicates the protocol type.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\