Dell Chassis Management Controller Version 3.10 for PowerEdge VRTX RACADM CLI Guide

getmacaddress

Table 1. Details of getmacaddress. The following table provides the details of getmacaddress attribute:
Description	Displays the MAC/WWN addresses and fabric ID decoder for all modules or for a specified module. The decoder values indicate the protocols of the network cards: 0—Unsupported 1—ISCSI 2—FCoE-FIP 3—iSCSI/FCoE-FIP To use this subcommand, you must have the CMC Login User privilege.
Synopsis	racadm getmacaddress racadm getmacaddress -m chassis racadm getmacaddress -m switch-<n> racadm getmacaddress [-m < module> [-x]] [-t iscsi] racadm getmacaddress -a racadm getmacaddress -c IO-Identity racadm getmacaddress -c Flexaddress racadm getmacaddress -c Factory racadm getmacaddress -c all
Input	-m < module > — Specifies the module whose MAC address you want to view. < module > may be one of the following: `server- n`, where n=1–4 `switch- n`, where n=1 -t —Displays the iSCSI MAC addresses for all servers or the specified server if used with -m option. -x —Displays the extra MACs (Ethernet or iSCSI) for servers with additional LOM MACs and must be used with -m option. -a—Displays the Ethernet and iSCSI MAC/WWN addresses for all iDRAC/LOMs/mezzanine cards. When FlexAddress is enabled for a particular slot, then the chassis-assigned MAC/WWN address is displayed. -c —Displays the ethernet, iSCSI, MAC/WWN, assignment type, and partition status of all LOMs or mezzanine cards. Valid values for the `-c` option are: IO-Identity—Displays the user-defined MAC/WWN addresses. FlexAddress—Displays the chassis-assigned WWN/MAC addresses. Factory—Displays the MAC/WWN addresses for all LOMs or mezzanine cards. all—Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.

Example

Displays the NDC or LOM MAC address.
```
racadm getmacaddress
```
Display iSCSI MAC addresses for all servers.
```
racadm getmacaddress -t iscsi
```

Display iSCSI MAC for server-1.

racadm getmacaddress -m server-1 -t iscsi

Display extra iSCSI MACs for server-1 (if available).
```
racadm getmacaddress -m server-1 -t iscsi -x
```

Displays the user-defined MAC and WWN address.

racadm getmacaddress -c io-identity

racadm getmacaddress -c io-identity -m server -2

Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.
```
racadm getmacaddress -c all 
```
Displays the chassis assigned WWN/MAC address.
```
racadm getmacaddress -c flexaddress
```
Displays the MAC/WWN addresses for all LOMs or mezzanine cards.
```
racadm getmacaddress -c factory
```

Table 2. MAC address for chassis.
Displays the MAC address for chassis.

racadm getmacaddress -m chassis
`< Name>`	`< Presence>`	`< BMC MAC Address>`	`< NIC1 MAC Address>`	`< NIC2 MAC Address>`
CMC	Present	N/A	F0:4D:A2:77:71:72	N/A

Table 3. MAC address for switch-1.
Displays the MAC address for switch-1

racadm getmacaddress -m switch-1
< Name>	< Presence>	< BMC MAC Address>	< NIC1 MAC Address>	< NIC2 MAC Address>
Switch-1	Present	Not Installed	00:00:00:00:00:00	Not Installed

Table 4. MAC for server-1.

Display MAC for server-1.

racadm getmacaddress -m server-1

<
                                                Name>

<
                                                Presence>

<
                                                BMC MAC Address>

<
                                                NIC1 MAC Address>

<
                                                NIC2 MAC Address>

server-1

Present

00:11:43:FD:B7:2A

00:11:43:FD:B7:2A

00:11:43:FD:B7:2B

server-4

Extension(1)

N/A

00:11:43:FD:B7:2C

00:11:43:FD:B7:2D

Table 5. MACs for server-1.

Display extra MACs for server-1 (if available).

racadm getmacaddress -m server-1 -x

<
                                                Name>

<
                                                Presence>

<
                                                BMC MAC Address>

<
                                                NIC1 MAC Address>

<
                                                NIC2 MAC Address>

server-1

Present

00:11:43:FD:B7:2A

00:11:43:FD:B7:2A

00:11:43:FD:B7:2B

00:11:43:FD:B7:2C

00:11:43:FD:B7:2D

Table 6. MAC address.
Displays the MAC address.

racadm getmacaddress
< Name>	< Presence>	< BMC MAC Address>	< NIC1 MAC Address>	< NIC2 MAC Address>
CMC	Present	N/A	00:1E:4F:1F:3C:58	N/A
Server-1	Present	00:1E:4F:2A:AF:7B	00:1E:4F:2A:D3:97	00:1E:4F:2A:D3:99
Server-2	Present	00:22:19:D2:1E:84	N/A	N/A
Server-3	Not Present	N/A	N/A	N/A
Server-4	Present	00:18:8B:FF:45:2A	00:18:8B:FF:AA:02	00:18:8B:FF:AA:04
Switch-1	Present	N/A	00:00:00:00:00:00	N/A

Table 7. Ethernet and iSCSI MAC/WWN addresses.
Displays the Ethernet and iSCSI MAC/WWN addresses for all iDRAC/LOMs/mezzanine cards.

racadm getmacaddress -a
< Name>	< Type>	< Presence>	< BMC MAC Address>	< NIC1 MAC Address>	< NIC2 MAC Address>
CMC	N/A	Present	N/A	00:1E:4F:1F:3C:58	N/A
Server-1-A	Gigabit Ethernet	Present	00:1E:4F:2A:AF:7B	00:1E:4F:2A:D3:97	00:1E:4F:2A:D3:99
	iSCSI	Present		00:1E:4F:2A:D3:98	00:1E:4F:2A:D3:9A
Server-1-B	Gigabit Ethernet	Present		Not Installed	Not Installed
	iSCSI	Present		Not Installed	Not Installed
Server-1-C	Fibre Channel 4	Present		Not Installed	Not Installed
Server-2-A	Gigabit Ethernet	Present	00:22:19:D2:1E:84	N/A	N/A
	iSCSI	Present		N/A	N/A
Server-2-B	Gigabit Ethernet	Present		Not Installed	Not Installed
	iSCSI	Present		Not Installed	Not Installed
Server-2-C	Fibre Channel 4	Present		Not Installed	Not Installed
Server-3	N/A	Not Present	N/A	N/A	N/A
Server-4-A	Gigabit Ethernet	Present	00:18:8B:FF:45:2A	00:18:8B:FF:AA:02	00:18:8B:FF:AA:04
	iSCSI	Present		00:18:8B:FF:AA:03	00:18:8B:FF:AA:05
Server-4-B	Gigabit Ethernet	Not Present		Not Installed	Not Installed
	iSCSI	Present		Not Installed	Not Installed
Server-4-C	Fibre Channel 4	Present		Not Installed	Not Installed
Switch-1	None	Present	N/A	00:00:00:00:00:00	N/A

Table 8. User-defined MAC and WWN address.
Displays the user-defined MAC and WWN address.

racadm getmacaddress -c IO-Identity
< Name>	< Type>	< Presence>	< Active WWN/MAC>	< Partition Status>	< Assignment Type>
server-1-A	IDRAC-Controller	Present	18:A9:9B:FD:C4:DF	N/A	Factory
	Gigabit Ethernet	Present	00:0A:00:0A:00:00	Unknown	IO-Identity
	Gigabit Ethernet	Present	00:0A:00:0A:00:01	Unknown	IO-Identity
	Gigabit Ethernet	Present	00:0A:00:0A:00:02	Unknown	IO-Identity
	Gigabit Ethernet	Present	00:0A:00:0A:00:03	Unknown	IO-Identity

Table 9. MAC/WWN addresses.
Displays the MAC/WWN addresses for all LOMs or mezzanine cards.

racadm getmacaddress -c factory
< Name>	< Type>	< Presence>	< Active WWN/MAC>	< Partition Status>	< Assignment Type>
Server-3-A	IDRAC-Controller	Present	5C:F9:DD:D6:1C:CE	N/A	Factory
	Gigabit Ethernet	Present	84:8F:69:FC:E8:F0	Unknown	Factory
	Gigabit Ethernet	Present	84:8F:69:FC:E8:F1	Unknown	Factory
Switch-1	10 GbE KR	Present	F8:B1:56:45:DD:BD	N/A	Factory

Table 10. Chassis-assigned WWN/MAC address.
Displays the chassis-assigned WWN/MAC address.

racadm getmacaddress -c flexaddress
< Name>	< Type>	< Presence>	< Active WWN/MAC>	< Partition Status>	< Assignment Type>
Server-4-A	IDRAC-Controller	Present	F8:DB:88:3D:9F:A7	N/A	FlexAddress
	10 GbE KR	Present	F8:DB:88:3D:9F:A9	Disabled	FlexAddress
	10 GbE KR/3	Present	F8:DB:88:3D:A2:78	Unknown	FlexAddress
	10 GbE KR/3	Present	F8:DB:88:3D:A2:7B	Unknown	FlexAddress

NOTE: 10 GbE KR/3 —The value 3 indicates the protocol type.

Table 11. Console assigned MAC/WWN.
Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.

racadm getmacaddress -c all
< Name>	< Type>	< Presence>	< Active WWN/MAC>	< Partition Status>	< Assignment Type>
CMC	N/A	Present	34:17:EB:E6:E0:24	N/A	Factory
Server-1-A	10 GbE KR	Not Installed	10:98:36:AC:70:EB	Not Installed	Not Installed
Server-2	Not Installed	Not Present	Not Installed	Not Installed	Not Installed
Server-3-A	Reserved	Present
Switch-4	Not Installed	Not Present	Not Installed	Not Installed	Not Installed
Switch-1	Not Installed	Not Present	Not Installed	N/A	N/A

NOTE: If the I/O Modules in slots 1 and 2 are absent and the getmacaddress -a and getmacaddress —c all commands are run, the output is displayed as Not Installed in the following columns:
- <Presence>
- <NIC1 MAC Address>
- <NIC2 MAC Address>

Welcome

Welcome to Dell

Dell Chassis Management Controller Version 3.10 for PowerEdge VRTX RACADM CLI Guide

getmacaddress

Rate this content