Server Administrator Storage Management 8.2 User’s Guide

Consider a case where you reboot your system and Storage Management, displays the logical connector with a path failure message. It is possible that you may have intentionally unplugged the second connector. In this case, the path failure message is not relevant. There could be a fault in the connected cable or the cable may not be connected properly to the controller. In both cases, Storage Management displays that the system was in redundant path configuration before reboot and is no longer in this configuration. If you are sure you, do not want the redundant path mode, clear the existing redundant path view using Clear Redundant Path View provided in the Changing The Controller Properties controller task. Selecting this option clears the redundant path view and the connectors are represented on the user interface as Connector 0 and Connector 1.