Server Administrator Storage Management 8.2 User’s Guide

PDF

PCIe SSD Subsystem Properties

The PCIe SSD subsystem comprises of the following components:

Backplane
Extender Card
PCIe Solid-State Device

Table 1. PCIe SSD Subsystem Properties
Properties	Description
ID	Displays the subsystem ID assigned to the PCIe SSD subsystem by Storage Management. Storage Management numbers the controllers and PCIe SSD subsystems attached to the system starting with zero. This number is the same as the PCIe SSD subsystem ID number reported by the `omreport`command. For information on Command Line Interface, see the Server Administrator Command Line Interface User's Guide . NOTE: In CLI commands, the PCIe SSD subsystem ID is displayed as the controller ID.
Status	These icons represent the severity or health of the PCIe SSD Subsystem. — Normal/OK — Warning/Non-critical — Critical/Failure/Error
Name	Displays the name of the subsystem.
Slot ID	Displays the slot to which the PCIe SSD subsystem is attached. NOTE: If Not Applicable is displayed, you can identify the Slot ID by selecting the System > Main > Systems Chassis > Slots object in the tree view and clicking the Information tab. The Slot ID property on this tab may display the correct information.
State	Displays the status of the subsystem. Possible values are: Ready — The subsystem is functioning normally. Degraded — The subsystem has encountered a failure and is operating in a degraded state. Failed — The subsystem has encountered a failure and is no longer functioning.
Number of Extender Cards	Displays the number of extender cards in the subsystem. Each extender card can be attached to physical disks or an enclosure. The extender card must be a PCIe SSD port.
Available Reports	Allows you to view the Slot Occupancy report. For more information, see Available Reports.