Dell Precision Mobile Workstation M4800 Owner's Manual

Removing the Display Assembly

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
   1. battery
   2. base cover
   3. keyboard trim
   4. keyboard
   5. optical drive
   6. hard drive
   7. palmrest
3. Disconnect the antenna cables from the wireless cards, and push them down the routing hole.

   

4. Flip the computer and pull up the antenna cables through the routing hole.

   

5. Flip the computer and remove the screws from the bottom and back of the computer.

   

6. Remove the screw that secures the low-voltage differential signalling (LVDS) cable bracket. Remove the LVDS cable bracket and disconnect the LVDS and camera cable from the system board.

   

7. Remove the screws that secure the display assembly to the computer. Lift up and remove the display assembly from the computer.