Dell Chassis Management Controller Version 2.0 for PowerEdge FX2 and FX2s User's Guide

Adding members to Chassis Group

1. Log in with chassis administrator privileges to the leader chassis.
2. Select the lead chassis in the tree.
3. Click Setup > Group Administration.
4. Under Group Management, enter the member’s IP address or DNS name in the Hostname/IP Address field.
   NOTE For MCM to function properly, you must use the default HTTPS port (443) on all group members and the leader chassis.
5. In the User Name field, enter a user name with chassis administrator privileges for the member chassis.
6. Type the corresponding password in the Password field.
7. Optionally, select Sync New Member with Leader Properties to push leader properties to the member. For more information about adding members to chassis group, see Synchronizing a New Member With Leader Chassis Properties.
8. Click Apply.
9. To add a maximum of 19 members, complete the tasks in step 4 through step 8. The chassis names of the new members appear in the Members dialog box.
   NOTE The credentials entered for a member are passed securely to the member chassis to establish a trust relationship between the member and lead chassis. The credentials are not persisted on either chassis, and are never exchanged again after the initial trust relationship is established.