OpenManage Integration for VMware vCenter Version 4.0 Web Client User's Guide

Viewing additional hardware details for data center and clusters

1. In OpenManage Integration for VMware vCenter, in the Navigator pane, click vCenter.
2. Click Datacenters or Clusters.
3. In the Objects tab, select the specific data center or cluster for which you want to view the host component details.
4. In the Monitor tab, select the Dell Datacenter/Cluster Information tab.
   On the <Component Name> subtab, view the following information for each of the components:

   Table 1. Single host informationThe following table provides the firmware, power monitoring, and warranty status details for a single host.

   Component	Information
   Firmware	Host—displays the name of the host Service Tag—displays the service tag of the host Name—displays the name of all the firmware on this host Version—displays the version of all the firmware on this host
   Power Monitoring NOTE: To display the full list of details, select a specific host from the data grid.	Host—displays the name of the host Service Tag—displays the service tag of the host Current Profile—displays power profile to maximize your system’s performance and conserve energy Energy Consumption—displays the energy consumption of the host Peak Reserve Capacity—displays the peak power reserve capacity Power Budget—displays the power cap for this host Warning Threshold—displays your system's configure maximum value for temperature probe warning threshold Failure Threshold—displays your system's configure maximum value for temperature probe failure threshold Instant Reserve Capacity—displays the host instantaneous headroom capacity Energy Consumption Start Date—displays the date and time when the host began to consume power Energy Consumption End Date—displays the date and time when the host stopped to consume power System Peak Power—displays the host peak power System Peak Power Start Date—displays the date and time when the host peak power started System Peak Power End Date—displays the date and time when the host peak power ended System Peak Amps—displays the hosts peak amps System Peak Amps Start Date—displays the starting date and time of the host peak amps System Peak Amps End Date—displays the end date and time of the host peak amps
   Warranty Summary NOTE: To view a warranty status, ensure to run a warranty job. See Running a warranty retrieval job. The Warranty Summary page lets you monitor the warranty expiration date. The warranty settings control when server warranty information is retrieved from Dell online by enabling or disabling the warranty schedule, and then setting the Minimum Days Threshold alert.	Warranty Summary—the host warranty summary is displayed using icons to visually show the number of hosts in each status category Host—displays the host name Service Tag—displays the service tag of the host. Description—displays a description. Warranty Status—displays the warranty status of the host. Status options include: Active—the host is under warranty, and has not exceeded any threshold Warning—the host is Active, but exceeded the warning threshold Critical—same as warning, but for a critical threshold Expired—the warranty has expired for this host Unknown—OpenManage Integration for VMware vCenter does not get warranty status because the warranty job is not run, an error has occurred getting the data, or the system does not have a warranty Days Left—displays the number of days left for the warranty