OpenManage Integration for VMware vCenter Version 4.0 Web Client User's Guide

Viewing hardware inventory information for chassis

You can view information about the hardware inventory within the selected chassis. To view the information in this page, ensure that you run an inventory job and export a CSV file with the component information.

1. In the Home page, click vCenter.
2. In the left pane, under OpenManage Integration, click Dell Chassis.
3. In the left pane, select the corresponding chassis IP.
4. Click the Monitor tab.
   To view the relevant component information, navigate through OMIVV:

   Table 1. Hardware inventory informationThe following table provides the information that is displayed for each of the chassis component.

   Hardware inventory: Component	Navigation through OMIVV	Information
   Fans	Use either of the following methods: In the Overview tab, click Fans. In Monitor tab, expand the left pane, click Hardware Inventory, and then click Fans.	Information about fans: Name Present Power State Reading Warning Threshold Critical Threshold Minimum Maximum
   Power supplies	Use either of the following methods: In the Overview tab, click Power Supplies. In the Monitor tab, expand the left pane, click Hardware Inventory, and then click Power Supplies.	Information about power supplies: Name Capacity Present Power state
   Temperature sensors	Use either of the following methods: In the Overview tab, click Temperature Sensors. In the Monitor tab, expand the left pane, click Hardware Inventory, and then click Temperature Sensors.	Information about temperature sensors: Location Reading Warning threshold Maximum Minimum Critical threshold Maximum Minimum NOTE: For PowerEdge M1000e chassis, information about the temperature sensors is displayed only for chassis. For other chassis, information about the temperature sensors is displayed for chassis and associated modular servers.
   I/O modules	Use either of the following methods: In Overview tab, click I/O Modules. In Monitor tab, expand the left pane, click Hardware Inventory, and then click I/O Modules.	Information about I/O modules: Slot/Location Present Name Fabric Service Tag Power Status To view additional information, select the corresponding I/O module and the following information is displayed: Role Firmware version Hardware version IP address Subnet mask Gateway MAC address DHCP enabled
   PCIe	Use either of the following methods: In the Overview tab, click PCIe. In the Monitor tab, expand the left pane, click Hardware Inventory, and then click PCIe.	Information about PCIe: PCIe slot Slot Name Power status Fabric Server slot Name Number To view additional information, select the corresponding PCIe and following information is displayed: Slot type Server mapping Assignment status Allocated slot power PCI ID Vendor ID NOTE: PCIe information is not applicable for M1000e chassis.
   iKVM	Use either of the following methods: In the Overview tab, click iKVM. In the Monitor tab, expand the left pane, click Hardware Inventory, and then click iKVM.	Information about iKVM: iKVM Name Present Firmware version Front Panel USB/Video enabled Allow access to CMC CLI NOTE: You can view information about the iKVM only for PowerEdge M1000e Chassis NOTE: The iKVM tab is displayed only if the chassis contains iKVM module.