Dell Chassis Management Controller Version 2.0 for PowerEdge FX2 and FX2s RACADM CLI Guide

cfgSerialConsoleQuitKey (Read or Write)

Description

This key or key combination terminates the Virtual Console text for CMC.

Legal value:

String of up to 2 characters

This key specifies the character that ends the serial text console connect (or racadm connect) command.

NOTE: The CTRL key does not generate a character by itself, but must be struck simultaneously with another key to generate a character.

For example, striking both the CTRL key and the \ key simultaneously (rather than sequentially) is denoted as ^\.

Configuration options: The value must start with the ^ character, and must follow one of the characters — a-z, A-Z, [,], \

In the input command, use \ without the quotes. For example:

config -g cfgSerial -o cfgSerialConsoleQuitKey "SHIFT+6"\\

Default: