Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

PDF

Function Calls of Setenvironment Option

The following table lists the function calls of the setenvironment option.

Table 1. Function Calls of the setenvironment Option
Function Call	Description
`getfirmware`	Returns the firmware version of the specified controllers. Example: A:>raidcfg -se -envn=FIRMWARE -envc= getfirmware -c=2 FIRMWARE=531T RAIDCFG Command successful!
`getcontrollertype`	Returns LSI for LSI controllers and ADAP for Adaptec controllers. Example: A:>raidcfg -se -envn=CONTROLLERTYPE -envc= getcontrollertype -c=2 CONTROLLERTYPE=LSI RAIDCFG Command successful!
`getadisks`	Returns the array disks attached to the controller. Example: A:>raidcfg -se -envn=ADISKS -envc=getadisks -c=2 ADISKS=0:0:1,0:1:1,0:2:1 RAIDCFG Command successful!
`getfreeadiskcount`	Returns the number of free array disks found in the specified controller. Example: A:>raidcfg -se -envn=FREEADISKCOUNT -envc= getfreeadiskcount -c=2 FREEADISKCOUNT=2 RAIDCFG Command successful!
`getfreeadisksize`	Returns the total size of the free array disks in megabytes. Example: A:>raidcfg -se -envn=FREEADISKSIZE -envc= getfreeadisksize -c=2 FREEADISKSIZE=15346 RAIDCFG Command successful!
`gethotspares`	Returns the global hot spares (global failover disks) found on the specified controller. Example: A:>raidcfg -se -envn=HOTSPARES -envc= gethotspares -c=2 HOTSPARES=1:8:1,1:9:1 RAIDCFG Command successful!
`getfreeadisks`	Returns the free array disks. A:>raidcfg -se -envn=GETFREEADISKS -envc= getfreeadisks -c=2 GETFREEADISKS=0:3:1,0:4:1 RAIDCFG Command successful!
`getadiskcount`	Returns the total number of array disks. A:>raidcfg -se -envn=GETADISKCOUNT -envc= getadiskcount -c=2 GETADISKCOUNT=1 RAIDCFG Command successful!