Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

Importing And Clearing Foreign Configurations

The following table lists the RAIDCFG options, parameters, and pre-defined arguments for foreign configurations.

Table 1. RAIDCFG Options for Foreign Configurations
Mandatory Options and Arguments	Optional Parameters	Valid Parameters Arguments	Description
`-ctrl -c=id` `-ac=fgnimp` or `controller controllerid=id` `action=foreignimport`	NA	NA	Imports the foreign configuration detected in the selected controller. This feature is supported on PERC 5 and later controllers and is not supported on SAS controllers. If you use this argument on a controller that does not have a foreign configuration, the `No Foreign configuration present in the controller` message is displayed. Example: A:>raidcfg -ctrl -c=2 -ac=fgnimp
`-ctrl -c=id` `-ac= fgnclr` or `controller` `controllerid=id foreignclear`	NA	NA	Clears the foreign configuration detected in the selected controller. This feature is supported on PERC 5 and later controllers and is not supported on SAS controllers.. If you use this argument on a controller that does not have a foreign configuration, the `No Foreign configuration present in the controller` message is displayed. Example: A:>raidcfg -ctrl -c=2 -ac=fgnclr
`-ctrl -c=id` `-ac=fgnrvr` or `controller controllerid=id` `action=foreignrecover`	NA	NA	Recovers the foreign configuration detected in the selected controller. This feature is supported on PERC 5 and later controllers and is not supported on SAS controllers. If you use this argument on a controller that does not have a foreign configuration, the `No Foreign configuration present in the controller` message is displayed. Example: A:>raidcfg -ctrl -c=2 -ac=fgnrvr