Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

Enumerating RAID Controllers

The following table lists the RAIDCFG options, parameters, and pre-defined arguments for enumerating RAID controllers.

Table 1. Enumerating RAID Controllers
Mandatory Options and Arguments	Optional Parameters	Valid Parameters Arguments	Description
`-ctrl or controller`	NA	NA	Lists all the RAID controllers on the host system, along with select property information. This option is mandatory Example: Controller_ID/Slot_ID: 0 Controller_PCI_ID: 2:14:0 Controller_Name: PERC 6/E Channels: 2 No.of Virtual_Disks: 1 Array_Disks: 0:0:0,1:2:0,1:3:0,1:4:0,1:5:0 Firmware Version: 5130 Controller_ID/Slot_ID: 3 Controller_PCI_ID: 3:11:0 Controller_Name: PERC 6/E Channels: 2 No.of Virtual_Disks: 0 Firmware Version: 3500 RAIDCFG Command successful!
	`-c or controllerid`	`< valid controller ID number>`	Displays the properties for the RAID controller with the specified controller ID. This option combination is mandatory. Example: A:>raidcfg -ctrl -c=2 Controller_ID/Slot_ID: 2 Controller_PCI_ID: 8:14:0 Controller_Name: PERC 6/E Channels: 2 Virtual_Disks: 1 Firmware Version: 521S RAIDCFG Command successful!

Table 1. Enumerating RAID Controllers

Mandatory Options and Arguments

Optional Parameters

Valid Parameters Arguments

Description

-ctrl or controller

Lists all the RAID controllers on the host system, along with select property information. This option is mandatory

Example:

Controller_ID/Slot_ID: 0
                                             Controller_PCI_ID: 2:14:0
                                             Controller_Name: PERC 6/E
                                             Channels: 2

No.of Virtual_Disks: 1
                                             Array_Disks:
                                             0:0:0,1:2:0,1:3:0,1:4:0,1:5:0
                                             Firmware Version: 5130

Controller_ID/Slot_ID: 3
                                             Controller_PCI_ID: 3:11:0
                                             Controller_Name: PERC 6/E
                                             Channels: 2

No.of Virtual_Disks: 0
                                             Firmware Version: 3500

RAIDCFG Command successful!

-c or controllerid

< valid controller ID number>

Displays the properties for the RAID controller with the specified controller ID. This option combination is mandatory.

Example:

A:>raidcfg -ctrl -c=2
                                             Controller_ID/Slot_ID: 2
                                             Controller_PCI_ID: 8:14:0
                                             Controller_Name: PERC 6/E
                                             Channels: 2
                                             Virtual_Disks: 1
                                             Firmware Version: 521S
                                             RAIDCFG Command successful!

환영

환영합니다.

Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

Enumerating RAID Controllers

본 콘텐츠를 평가해주십시오.