Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

Failures And Solutions

The following table lists the common SYSCFG failures and their solution.

Table 1. SYSCFG Failures and Solutions
Failure Messages	Solutions
Generic failure.	Indicates iDRAC is in bad state. Reboot iDRAC.
New value not valid.	Make sure the changed value is valid.
Cannot disable this orderedList’s entries.	BIOS does not support enabling or disabling of a particular boot order object.
System busy, try again later.	Retry as iDRAC is busy with internal processing.
Unable to connect IDRAC data manager.	Start data manager service using `srvadmin_services` (specific to Linux).
System Services and/or CSIOR disabled.	Enable CSIOR from <F2> screen.