Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

Reads the RAID configuration information from the given .ini filename and creates the RAID configurations on the specified controllers. This option is mandatory.

Example:

A:> raidcfg -i=\tmp\raid.ini

Reads the RAID configurations from all available controllers and writes these configurations in the raid.ini file under the /tmp directory (in Linux systems). This option is mandatory.

Example:

A:> raidcfg -o=\tmp\raid.ini

The contents of the raid.ini file are:
                                                [vdisk0]
                                                controllerid=0
                                                size=123456
                                                raid=5
                                                readpolicy=ra
                                                writepolicy=wt
                                                stripesize=32
                                                cachepolicy=d
                                                adisk=0:0:1,0:1:1,0:2:1
                                                [vdisk1]
                                                controllerid=0
                                                size=65345
                                                raid=1
                                                readpolicy=ra
                                                writepolicy=wt
                                                stripesize=64
                                                cachepolicy=d
                                                adisk=0:3:1,0:4:1